XFI e dash installation issue


I recently sent my 1.34 box in for repair and upgrade to 2.05. Is there an alternative to using pin #31 for the pigtail as mine is being used for something else.


Classic fast, XFI, & Sportman, online programming
Its not used for anything remove the pin and tape it up.

michael evans

Well-Known Member
It is not normally used as the laptop uses C27,C28, and C29 (ground). The EGT system I have has a "Y" built into the wiring harness to allow the E-dash to also use C30,C31 and D5 (ground).