wtb 4.1 production block

gteatr6

Member
Joined
Apr 10, 2004
Looking for either just a 4.1 production block or complete motor to tear down. Prefer 291 casting. Anyone got some for sale? I'm in Byron, IL
 
I have a 4.1 block for sale in Oswego, IL. I don't having the casting numbers off hand, but it's an early block. Doesn't have a knock sensor hole, so I think it's a 1980. I can send pictures tonight if you're interested. b4black@flash.net
 
25505553
Already been to the machine shop. Cleaned, new cam bearing and freeze plugs.

20181113_195236.jpg
 
I have a rare 044 block that has all the Same good stuff as the 291 . I bored the number one hole out to 4” so it still has to go to the machine shop to match the other 5 holes . I have gone through it with a grinder and removed all the casting slag . Shoot me a message if you are still needing one
 
Thanks for the replies so far, but really want a 291. I would consider a 484.
That’s all good idk if u read the what I wrote but this block has all the same features that make the 291 desirable. It’s all good I’m going to build it anyway .
 
That’s all good idk if u read the what I wrote but this block has all the same features that make the 291 desirable. It’s all good I’m going to build it anyway .

I read your post. Kind of wondering why and how was one cylinder bored and not the other 5?
 
I read your post. Kind of wondering why and how was one cylinder bored and not the other 5?
Because I actually started to bore it out and I finished one cylinder then was unable to get back to my buddy’s shop to do the rest . I’m just going to build it as I have a regal limited that’s just begging for a turboed 4.1 to be in her . Bench seat column shift with 500ish to the wheels should be a super fun sleeper
 

Attachments

  • CD018A2A-A103-4CEA-926F-A4D0253D36FE.jpeg
    CD018A2A-A103-4CEA-926F-A4D0253D36FE.jpeg
    1 MB · Views: 26
I have a built shortblock I’m looking to sell. Polished stock crank and rods, forged pistons, girdled, and roller cam. Just freshened and running in my car. 2700.00
 
i got a 291 300 dollars , bore is around .395 for 4 inch pistons in Dayton Ohio no i wont take 295
IMG_3479.jpg
 

Attachments

  • IMG_3485.jpg
    IMG_3485.jpg
    112 KB · Views: 42
  • IMG_3480.jpg
    IMG_3480.jpg
    59.8 KB · Views: 32
Top