Jerryl Tall Unvaccinated Chinese Guy Joined Dec 14, 2004 Dec 27, 2017 #1 Does anyone know if the wiring is correct for Scanmaster 2? Scanmaster is not communicating KOEO. Unit powers up but values are mostly 0.00. PC connection works fine.
Does anyone know if the wiring is correct for Scanmaster 2? Scanmaster is not communicating KOEO. Unit powers up but values are mostly 0.00. PC connection works fine.
pacecarta LOGGED OUT Staff member Joined Aug 1, 2003 Dec 27, 2017 #2 you need a scanmaster 3 XFI to connect with XFI
Jerryl Tall Unvaccinated Chinese Guy Joined Dec 14, 2004 Dec 27, 2017 #3 Thanks Doc. Typo error on my end. This is ScnMstr 3. Purchased with low miles and came from a XFI 2.0 car. Don't think this guy would have sold it to me if it was bad.
Thanks Doc. Typo error on my end. This is ScnMstr 3. Purchased with low miles and came from a XFI 2.0 car. Don't think this guy would have sold it to me if it was bad.
pacecarta LOGGED OUT Staff member Joined Aug 1, 2003 Dec 27, 2017 #4 ill have to check my wiring in the 87x , on that car i have sm3 wired to plug into the com cable that i use for the PC
ill have to check my wiring in the 87x , on that car i have sm3 wired to plug into the com cable that i use for the PC
pacecarta LOGGED OUT Staff member Joined Aug 1, 2003 Dec 27, 2017 #5 mine is wired the same as yours and you also need 12v switched to the long red power lead i;ve had issues with the sm3 display but not all zeros and twisting the case seemed to make it work , just send it to bob bailey for a checkup
mine is wired the same as yours and you also need 12v switched to the long red power lead i;ve had issues with the sm3 display but not all zeros and twisting the case seemed to make it work , just send it to bob bailey for a checkup
Jerryl Tall Unvaccinated Chinese Guy Joined Dec 14, 2004 Jan 24, 2018 #6 Posting feedback in the vendor section to publicly thank Bailey Engineering for a killer product, and product support!
Posting feedback in the vendor section to publicly thank Bailey Engineering for a killer product, and product support!
