What size Lug nuts?

[oc192]

Hello All,

I bought a set of Weld Draglites to replace my stock rims. I brought them up to discount tire to have them installed and was told they did not have the right lug nuts in stock. After checking around, I'm not sure now which ones to get.

Rear - 15x8 (4.5 in. back space) with 275x50x15
Front - 15x6 (3.5 in. back space) with 205x65x15

1) Can I use the stock studs or do I need longer ones?
2) The shank style comes in a few different lengths, which length should I get?
3) m12 x 1.5? or 7/16 x 20?

Any help would be appreciated...

Don

 

[pacecarta]

m12 X 1.5

you should run longer studs but many dont

the mcgard 63016 (closed end)
or the mcgard 63002 (open end race lug)

locking lug would be the mcgard 23185

 

[forcefed3.8's]

Draglites use the long shank, 1.38" I believe.

 

[oc192]

Thanks Guys, I have the wheels on and they look awesome but I did have to get a spacer for the rear becuase it was hitting the frame. Considering that, I think it would be best to get the longer studs. Can someone post a link to the proper stud I need?

thx Don

 

[pacecarta]

what i run with weld prostars
moser 8255 (pk of 10) 2.5" long 12mm x 1.5 .505" knurl
http://www.summitracing.com/parts/MSR-8255/

and the arp 7088 ( pk of 5) 2.5" long 12mm x 1.5 .509" knurl
http://www.summitracing.com/parts/ARP-100-7708/

you can also use these in the front

cheaper is the dorman 610-323 (box of 10) 2.25"long 1 2mmx1.5 .504" knurl
http://www.summitracing.com/parts/RNB-610-323

or you could call one of the vendors like Cottons