valve spring retainers

buickruss

Active Member
If I were to lose a keeper from my stock GN heads, can I use a v8-455 or 350 set of valve spring retainers? Not sure if they are the same size
 

Buick Mark

Active Member
Are you talking about the retainers or the locks/keepers????
The retainers go on top of the springs
The locks/keepers go AROUND the valve stem to "lock or keep" the retainer and spring in place.
NO on the valve locks from a Buick 350 or 455 fitting a V6, the Buick V8 uses 11 degree locks, so its a no go.
 

Buick Mark

Active Member
Heres the difference between the Buick 455 and V6 locks/keepers
 

Attachments

  • V6 valve locks.jpg
    V6 valve locks.jpg
    2.4 KB · Views: 17
  • 455 valve locks.jpg
    455 valve locks.jpg
    17.7 KB · Views: 16

hensleyt

Active Member
thank you for the info. I have done several GM more chevy and was unaware the 11 degree was used on the 455. My bad
Buickkruss I do have plenty of the correct keepers and retainers if needed for a Buick V6.
 
Top