Vacuum brake setup

[85tr]

Bought this from m233roller about 5 years ago and never used it. I don’t have room for it now with my throttle body relocated on my hot air. $175 shipped.

 

[85tr]

Ok $150 shipped.

 

[Trashman]

Still available? $125.00 shipped?

 

[85tr]

Still available but $150 shipped is as low as I’ll go.

 

[Trashman]

Ok let you know

 

[85tr]

I’ll take $125.

 

[Trashman]

Ok Whats your Paypal?

 

[AntMan]

Still available?

 

[JAMCAR223]

You can do it pretty cheap with new/warranted parts.

https://www.oreillyauto.com/detail/b/select-4494/brake-systems-16456/brake-hydraulics-16513/brake-master-cylinder-11289/3bff094046ed/brakebest-select-brake-master-cylinder-new/nmc11317/4581650/1986/buick/regal?q=brake+master+cylinder&pos=0

https://www.oreillyauto.com/shop/b/brake-systems-16456/brake-hydraulics-16513/power-brake-booster-11301/69bab478e25a/1986/buick/regal?q=power+brake+booster

VACUUM BRAKE PEDAL COMPLETE WITH HARDWARE

I have a complete vacuum brake pedal with correct original GM hardware ( bushing, bolt, washer, and clip ). It had a little corrosion, so I cleaned it up on the wire wheel. Paint to whatever finish you desire. $48 shipped to the lower 48 states. PayPal Friends & Family, or $50 to cover the fees...

turbobuick.com

 

[AntMan]

You can do it pretty cheap with new/warranted parts.

https://www.oreillyauto.com/detail/b/select-4494/brake-systems-16456/brake-hydraulics-16513/brake-master-cylinder-11289/3bff094046ed/brakebest-select-brake-master-cylinder-new/nmc11317/4581650/1986/buick/regal?q=brake+master+cylinder&pos=0

https://www.oreillyauto.com/shop/b/brake-systems-16456/brake-hydraulics-16513/power-brake-booster-11301/69bab478e25a/1986/buick/regal?q=power+brake+booster

VACUUM BRAKE PEDAL COMPLETE WITH HARDWARE

I have a complete vacuum brake pedal with correct original GM hardware ( bushing, bolt, washer, and clip ). It had a little corrosion, so I cleaned it up on the wire wheel. Paint to whatever finish you desire. $48 shipped to the lower 48 states. PayPal Friends & Family, or $50 to cover the fees...

turbobuick.com

Appreciate the information, using these items, would I need to replace brake pedal as well? Thanks for the help.

 

[JAMCAR223]

If you are converting from a Powermaster brake system, YES you will need the Vacuum brake pedal, as the pin location is in a different spot.

 

[AntMan]

If you are converting from a Powermaster brake system, YES you will need the Vacuum brake pedal, as the pin location is in a different spot.

Appreciate it, Thanks

 

[85tr]

Sorry I didn’t post earlier, setup is sold.