Two kinda dumb LC2 questions

[HYBRIDT]

Can anyone see a problem with mounting the stock fuel pressure regulator upside down and does anyone know if the PCV grommet in the intake is still available new?? Maybe a part number??? I'm fuel injecting my N/A regal using LC2 parts and I bought fuel rail fittings to adapt to AN fittings. The 90* fitting hits the intake coming out of the bottom of the FPR but the FPR will fit physically upside down, I just didn't know if there is anything internally about the regulator that would make it pissed if it was upside down. Thanks.


Adam

 

[CHANCE]

yes the gromet can b had at the dealership im sorry dont know the number but i just got one, also from taking the FPR apart i dont see any problem mounting it upside down

 

[jpwalt1987]

about the regulator...... many people have taken an aluminum -4 flare fitting cut the pipe thread side off and also the nut on the bottom of the regulator. then had them tig welded together. that should get you alot of room. that is what i am going to do when i get to that point on my build.

 

[gyrhead]

Grommet is #1381487

List about $8.00 at your local dealer. Stupid money for a $.02 part IMO