Mike T Well-Known Member Joined May 3, 2013 Apr 23, 2018 #1 Roughly .250 between sun shell tangs and direct drum. Center support went in and nothing is binding. Thought the two halves should mesh much closer.
Roughly .250 between sun shell tangs and direct drum. Center support went in and nothing is binding. Thought the two halves should mesh much closer.
I INEEDAGN Seen Your Member Joined Feb 28, 2003 Apr 24, 2018 #2 Be nice if they did, huh? But they usually have a pretty good gap there. I've never measured it, but it probably lines up with the existing wear pattern on the drum
Be nice if they did, huh? But they usually have a pretty good gap there. I've never measured it, but it probably lines up with the existing wear pattern on the drum
Mike T Well-Known Member Joined May 3, 2013 Apr 24, 2018 #3 Does seem like a waste of surface area. Mine has been welded in the past due to wear in that area.