Slammed Turbo Regal Picture Thread........

YES Craig!!! It's moving on its own! It's actually been moving on its own for a while now. Just need to get the fuel system in and then have Cal tune it!
 
Bring the car south when you set something up with Cal so I can have mine Cal-tuned at the same time! Maybe by that time my car will be running and driving again since I've had the a/c system off since July and STILL isn't ready to go back together.
 
hello people; When showing pics of your cars how about writing what you have installed. It would help members interested in a move to try them.
IBBY
 
Still havent washed it but here's a few more pics of my car.
securedownload.jpg
securedownload.jpg2.jpg
 
So give us some specs about those steam rollers; size, bs, notch, etc. Looks pretty bad as$$.
 
So give us some specs about those steam rollers; size, bs, notch, etc. Looks pretty bad as$$.

Front:
ATS (AFX) spindles w/C5 hubs
SPC double adjustable uppers
Stock boxed lower Arms
C5 Brakes
Moog 5658 springs
36 mm Hollow FBody swaybar
Aluminum core support
Aluminum bumper brackets and supports
18x8 Intro Pentia rims

Rear:
Currie Fab 9 housing (stock width) w/ johnny joints
Moser Wavtrac
Steel Nodular Third member
35 spline Moser axes
11.5" Currie Disc brakes
BellTech Springs
Currie Currectrac lowers w/ johnny joints
UMI double adjustable uppers
Frame notched and braced, fender and trim rolled
Aluminum bumper brackets and supports
Intro Pentia 18x10 w/ 315/30r18 Falken Azenis 5.5 BS
Intro Pentia 15x10 w/ 275/60r15 MT ET Streets 5.5 BS
 
I was told that car hardly ever leaves the driveway....at least in the last 4 years.

Sent from my SCH-I605 using TurboBuick Mobile mobile app
 
Update! With the new Ridetech "Tru-Turn" and Ridetech adjustable coil overs... Lowered another 1/2" in the rear.. No frame notch! ;) picture taken today...
Front - 18 x 9.5" w/ 4.75 back spacing with a 255/35-18 (moving up to 265 or 275)
Rear - 18 x 10" w/ 4.75 back spacing with a 285/40-18 (moving up to 295 or 305 still no frame notch)
20130626_103427.jpg
 
Intro Pentia 18x10 w/ 315/30r18 Falken Azenis 5.5 BS
Jeremy,

I have the Falken 615K Azenis 315/30-R18's sitting here in the garage for testing and I seen where you had them mounted on a 10" wide wheel, did the 10" wheel pull the tire in much? cause from the looks of it sitting here side by side it looks considerably larger than my 10" wheel.
 
20" helo's.chrome backing plates.air shocks in the rear
 

Attachments

  • 1374114686664.jpg
    1374114686664.jpg
    92.1 KB · Views: 593
Top