Silver T-Type T-top car (NY)

Joined
Jul 28, 2008
I purchased this car a few months ago off a guy on craigslist from Detroit. After flying from NY to Detroit i was disappointed that the owner didnt inform me on certain issues. It turns out 5 years ago the car was stolen and the vin was ripped off the dash. The state of Michigan issued it a new vin and plate on the door jam. The vin comes back as an 81 Regal. I cannot verify if this car is a real 87 T-type/turbo car. There is no rpo sticker either. I called Michigan DMV and had them check the Vin, it came back with no issues. The car now has a clean NY title.

The cluster shows 33,xxx but im sure is actually 133k

The car has the 8.5" rear, 87 motor/BRF code 2004r, front/rear sway bars, ect.
IMG_20120414_144345w.jpg


Here is a brief list of whats done to the car AFAIK:

42lb injectors
Kenne Belle fuel press. regulator
Walboro 255 w/ hotwire kit
Plenum spacer
LS1 Maf & translator
Precision TE-52
Turbo XS BOV
TT chip
3" with side trap to dual hooker aero chambers
BRF code 2004r with red line bands and shift kit
ARP head studs and gaskets
Airbag shocks in the rear
Autometer cobalt gauges in a-pillar pod and ttop pod
Manual boost controller
K&N filter

The previous owner had the motor work done at Agressive Performance (http://www.aggressiveauto.com/)

The motor runs great and pulls hard at 16psi. The transmission shifts nice and stout with no issues.

The paint looks good but it somewhat of an amateur job. I believe the car was originally black with chrome bumpers. The body is in great shape and 99% rust free. There is one or two spots where there are small rust bubbles. The bottoms of the doors on the inside are just starting to show a small amount of surface rust. The frame is mint, the car does need a drivers floor pan or patch ( i will get a picture when i get the car on the lift), the rest of the floors are in great shape.

The car needs window to door seals, lower door seals and probably T-top seals. The Tops leak only under heavy rain in one spot on the passenger side. The t-top plates do have some rust, i have front replacement plates to go with it. The windows are slightly cocked and need to be adjusted to seal the upper seal correctly. I keep the car garaged at all times to keep it out of the weather.

Driver side view mirror is broken internally.
Differential has a slight whine, not horrible just thought i would note it.
Fuel gauge and indicator lights dont work on the cluster.


Im looking to get $7,500 as it sits. Located 30 minutes west of Albany, NY

I will get more pictures up soon.

580219_10151479293260237_712510236_23428715_2143058834_n.jpg
556291_10151468836830237_712510236_23369917_768758792_n.jpg
 
bump, cash talks, i found something id like to buy but i need to sell this first.
 

Attachments

  • 540473_10151731346435237_712510236_24027450_607841404_n.jpg
    540473_10151731346435237_712510236_24027450_607841404_n.jpg
    196.8 KB · Views: 195
  • 20120521_122448w.jpg
    20120521_122448w.jpg
    371.2 KB · Views: 191
  • 20120521_121956w.jpg
    20120521_121956w.jpg
    437.9 KB · Views: 198
bump

Forgot to mention it has a convertor in it, i am unsure of the stall. Also i believe the intercooler is not stock.
 
Good deal but that pic of the drivers floorpan I think is whats killin your action :( If that spot wasnt there I think this would be gone
 
Yeah i hear you. Its literally the ONLY spot of rust on the entire floor and undercarriage. I've done floor pans before, theyre not bad to do. I found the dr. side pan for $300 shipped, i would buy it and weld it in but i really dont want to throw any more money at this car.
 
Have a Beautiful black Chevy truck Ls2 6.0 swop cold ac. New 20 inch wheels motor is fresh. Comp cam just text me for pictures 9122701565. Thanks
 
Top