Shaft Rockers, Pistons and Suspension Parts...

Pics for those who had questions...thanks...

Shaft Rockers have provision for large diameter springs...

01-04-09001.jpg


Arias Pistons...

4.000" Bore Ring Package .043 .063 3/16" These were used with a 5.960" Rod 252 c.i.

01-04-09004.jpg
 
Any info on the springs? Are they lowering springs or drag springs? Looking to lower my car a little and firm up the ride..plan on doing shocks at the same time.

Thanks.
 
ATR Coil Springs...

Any info on the springs? Are they lowering springs or drag springs? Looking to lower my car a little and firm up the ride..plan on doing shocks at the same time.

Thanks.

These springs were part of a Suspension Kit that ATR packaged together. The Kit included Coil Springs, Bilstein Shocks, front and rear Sway Bars. The rear Springs are progressive rate wound, they have a comfortable ride while cruising around and firm up under load. The fronts are a heavier wire and wound tighter. The springs help reduce lateral body roll. They should lower the car about an inch from stock.
 
Top