Rotating assembly and two billet main cap block

psiedv6

Active Member
Joined
Apr 17, 2004
I have a rotating assembly with J&E pistons, stock crank and stock rods with ARP bolts. The crank is 10/10 now but will need to be turned 20/20 to clean up. One piston had a throttle body blade screw dance around in the cylinder for a little bit before the exhaust shot it out. The piston is fine to use, it's just not perfect looking.

Rotating assembly $700 shipped to the lower 48 states

109 block .030 over with two center billet caps and ARP main studs.
$850 pick up

Posted from the TurboBuick.Com mobile app
 

Attachments

  • 1407616172084.jpg
    1407616172084.jpg
    174 KB · Views: 202
  • 1407616274414.jpg
    1407616274414.jpg
    191.9 KB · Views: 198
  • 1407616364717.jpg
    1407616364717.jpg
    237 KB · Views: 198
  • 1407617105181.jpg
    1407617105181.jpg
    181.7 KB · Views: 212
  • 1407617148679.jpg
    1407617148679.jpg
    118.1 KB · Views: 189
  • 1407617230660.jpg
    1407617230660.jpg
    157.8 KB · Views: 192
Looking for a stroker motor for my tta. Are you still building motors? What ever happen to that Ta block you had?
 
Top