Refurbished Cat Hanger Stock Headers & Other NICE !! Parts

m233roller

Banned
Joined
Jan 25, 2002
Here are some very nice parts I have had stashed away for my own use but can't keep everything so here's your chance at some damn NICE parts !!

0- Nice refurbished cat conv. hanger. End hole on C shaped piece was opened up but will still bolt up just fine.
Has all new stainless steel hardware and a super tuff strap. $75
1- Heater hard lines, glass beaded and sprayed Hi- Temp gloss black, NOT kinked, bent, rusty ect. $50
2- About the nicest used balancer Iv'e seen. $75
3- Powermaster motor off a 42,000 mile car. KNOWN GOOD. $100
4- Pair of alumimun drums, sandblasted, turned and ready to go. Painted with Hi-Temp gloss black. Plenty left for one or two more cuts depending on wear.
Do have some fins nicked up on the ends but once on the car you'd never know it. $100 for the pair.
5- Excellent set of stock exhaust manifolds. I gave them a mild port clean up as you can see in the pics. and the drivers side had the usual hairline crack right beside the factory weld, has been tig welded and done RIGHT. They are flat and all ends are nice and round and all heat shields are there. $200 and $25 to box and ship them in the lower 48.

ALL PARTS are PLUS SHIPPING and 3% fees if paypaling. Thanks Mike
 

Attachments

  • 006.JPG
    006.JPG
    1 MB · Views: 126
  • 007.JPG
    007.JPG
    1 MB · Views: 123
  • 008.JPG
    008.JPG
    1 MB · Views: 123
  • 008.JPG
    008.JPG
    959 KB · Views: 111
  • 009.JPG
    009.JPG
    976.9 KB · Views: 110
  • 010.JPG
    010.JPG
    1 MB · Views: 111
  • 011.JPG
    011.JPG
    1.1 MB · Views: 109
  • 012.JPG
    012.JPG
    867.8 KB · Views: 109
  • 005.JPG
    005.JPG
    974.1 KB · Views: 110
  • 006.JPG
    006.JPG
    1.1 MB · Views: 104
Here's the rest of the pics.
 

Attachments

  • 007.JPG
    007.JPG
    1 MB · Views: 77
  • 013.JPG
    013.JPG
    2 MB · Views: 75
  • 014.JPG
    014.JPG
    2.2 MB · Views: 69
  • 001.JPG
    001.JPG
    1.1 MB · Views: 83
  • 002.JPG
    002.JPG
    1,006.4 KB · Views: 77
  • 003.JPG
    003.JPG
    737 KB · Views: 89
  • 004.JPG
    004.JPG
    689.9 KB · Views: 78
What's shipping cost for Powermaster motor off a 42,000 mile car. KNOWN GOOD. $100 to 20841?? Thanks
 
Consider the headers sold.

I will need a crossover in good shape.

Thank You!
Kevin
 
Interested in the Cat hanger w/stainless hardware. Would you take $50 shipped?
 
Top