New bearings for the main caps with crank in block (heads still on block)
Gonna try and sneak the uppers into place and need to use some oil so they slide in...
If I use plastigauge on the cap side of the bearing (installed dry) just figure my plastigauge on showing half the clearance because the upper bearing will already have the oil film in there?
Any thoughts appreciated
Gonna try and sneak the uppers into place and need to use some oil so they slide in...
If I use plastigauge on the cap side of the bearing (installed dry) just figure my plastigauge on showing half the clearance because the upper bearing will already have the oil film in there?
Any thoughts appreciated