Parts to Kirban's Open House May 4th

Anthony P

sharing knowledge with those who care to listen
Joined
Jan 24, 2007
Parts to Kirban's Open House Saturday, May 4th - No shipping at this time

K & N shrouded breather 62-1516 - NEW in package => $20

Generic push-in breather - NEW in package => $10

HR PartsNStuff poly trans mount #0600, NEW in box => $80

ATR 304 stainless MAF pipe kit, NEW => $80

LS engine valve spring tool, New, never used, from Bluegrass Performance => $60

Garrett HD adjustable wastegate actuator, 1011-144, tested good, used => $25
 

Attachments

  • K&N shrouded breather 62-1516.JPG
    K&N shrouded breather 62-1516.JPG
    3.3 MB · Views: 74
  • Pushin breather.JPG
    Pushin breather.JPG
    2.8 MB · Views: 73
  • HR 0600 poly trans mount.JPG
    HR 0600 poly trans mount.JPG
    3.3 MB · Views: 71
  • ATR MAF pipe.JPG
    ATR MAF pipe.JPG
    3.3 MB · Views: 87
  • LS engine valve spring tool.JPG
    LS engine valve spring tool.JPG
    3.2 MB · Views: 71
  • Wastegate actuator HD_1.JPG
    Wastegate actuator HD_1.JPG
    3.3 MB · Views: 72
  • Wastegate actuator HD_2.JPG
    Wastegate actuator HD_2.JPG
    3.3 MB · Views: 61
  • P1030257.JPG
    P1030257.JPG
    2.7 MB · Views: 60
******************ADDING A 2.5" MILD STEEL CAT BACK EXHAUST SYSTEM************

Originally purchased from Turbo City Performance in Orange, CA.....scuffed, prepped & painted in VHT black. Surface rust but a lot of life left in the tubing. Was saving this for the fun car build that never happened, expecting to have it JetHot coated or powder coated. But I've been concentrating on full restoration of the garage queen.

I'd suggest better mufflers - these turbo mufflers were not a straight thru design. mufflers are 2.5", offset in, center out. case about 14" long & 10" wide. here are a list of replacement mufflers on Summit.

2.5" SS mufflers on Summit - offset inlet, center outlet

Kirban's sells the Pypes 2.5" cat back exhaust for $570. the Pypes system is 409 SS which will rust and discolor just like the factory headers and crossover. 409 SS is not a true SS like 304 SS.

Considering the cost for replacement mufflers and JetHot coating - Asking $250.

***** I will only bring the exhaust if someone is interested and communicates that interest by Friday night. Thanks. *****************
 

Attachments

  • TurboCity GN 2.5 Exhaust1.jpg
    TurboCity GN 2.5 Exhaust1.jpg
    62 KB · Views: 55
  • TurboCity GN 2.5 Exhaust2.jpg
    TurboCity GN 2.5 Exhaust2.jpg
    70.6 KB · Views: 58
@davelostmissing, looks like you're up. nothing from @BluickT other than post above noting he bought one somewhere else. send me a pm with your info and I figure out shipping or pick it up at Richard Clark's next week.

@1KWIKSIX, did not receive your PM yet.
 
Garrett HD wastegate actuator is SOLD and shipped. thank-you.

I'll bring all the small parts to Richard Clark's next week. I can bring the exhaust if someone messages me before May 22nd. let me know.
 
ATR MAF pipe kit is SOLD

BRINGING THE FOLLOWING TO RICHARD CLARK'S:

K & N shrouded breather 62-1516 - NEW in package => $20

Generic push-in breather - NEW in package => $10

HR PartsNStuff poly trans mount #0600, NEW in box => $80

LS engine valve spring tool, New, never used, from Bluegrass Performance => $60

PLUS:

Sunpro (Actron) dwell meter tachometer (pricing TBD)

NOS in boxes Bosch 233 and 237 fuel pressure regulators (pricing TBD)

NOS in boxes AC DELCO wastegate solenoid 214-611 (GM 1997687) for hot air OR use a couple of washers to mount it on the valve cover stud of your 86-87 (pricing TBD)

NEW Walbro 255 lt/hr (F20000169) fuel pump kit from Full Throttle (retail $160) => $130

NOS GM body mount cushions 457915, 377801, 556755 (2 of each) to make one kit for adding the missing from GM lower #3, #4, and GNX #5 (pricing TBD - selling as a 6-cushion kit)

may also bring NOS GM front fillers, in boxes, not folded (pricing and availability TBD)

Find me at Richard's to see this stuff.
 
Top