Buick damper, with V-belt pulley from 85 Turbo Rivi (should fit Regal too no problem) $10+shipping, or less pulley to save postage. This should be unique to the SFI cars.
Turbo Riviera oil pan. This is from an 85 Rivi with a 20 bolt block, it may be good for some of you guys out there wanting to swap a 3.8L into a car with tight front clearances a mid sump pan won't work for. $20+shipping.
A 1227148 ECM I converted to a standard DIP stocket. This would be good for someone that wants to plug a ZIF in. Untested as I never got around to a motor swap for it. Due to this, $10 it's yours as-is.
Hot air exhaust housing, .63 A/R. This is a Garret, please note these were changed in 86 so it won't work on an intercooled car. I'd like $15+shipping for it, in good shape with no broken off bolts. The elbow comes with it, but the bolts for the DP flange need to be coiled and re-tapped probably. Will omit the elbow if someone just wants the housing to save shipping.
Aluminum rear bumper support. Worth 20# off from gnntype.org, definitely a worth while mod for these heavy cars. Will fit any G-body 78-87. $30+shipping.
not pictured are 3 8445 heads, 2 non turbo 1 turbo if I remember correctly. Good for someone wanting a few to get ported, port themselves etc. Free to a good home if you pick em up, $75 the lot+shipping if you want em.
I live in Carbondale,Illinois about 2 hours out of Kentucky or Saint Louis area. If you want to meet up for anything, I'm willing to spend some time on it if you pay for the gas.
Turbo Riviera oil pan. This is from an 85 Rivi with a 20 bolt block, it may be good for some of you guys out there wanting to swap a 3.8L into a car with tight front clearances a mid sump pan won't work for. $20+shipping.
A 1227148 ECM I converted to a standard DIP stocket. This would be good for someone that wants to plug a ZIF in. Untested as I never got around to a motor swap for it. Due to this, $10 it's yours as-is.
Hot air exhaust housing, .63 A/R. This is a Garret, please note these were changed in 86 so it won't work on an intercooled car. I'd like $15+shipping for it, in good shape with no broken off bolts. The elbow comes with it, but the bolts for the DP flange need to be coiled and re-tapped probably. Will omit the elbow if someone just wants the housing to save shipping.
Aluminum rear bumper support. Worth 20# off from gnntype.org, definitely a worth while mod for these heavy cars. Will fit any G-body 78-87. $30+shipping.
not pictured are 3 8445 heads, 2 non turbo 1 turbo if I remember correctly. Good for someone wanting a few to get ported, port themselves etc. Free to a good home if you pick em up, $75 the lot+shipping if you want em.
I live in Carbondale,Illinois about 2 hours out of Kentucky or Saint Louis area. If you want to meet up for anything, I'm willing to spend some time on it if you pay for the gas.