Off idle tip in stumble

[T- Type Tim]

Not sure about the FP, just keep an eye on the knock retard. I had a tip in problem and tried everything mentioned above, I finally made a small adjustment to the cam sensor and have never had it come back , It was set up with a cam sensor tool , but needed just a little more adjustment. I m pretty sure I moved it clockwise. Now I run a caspers adjustable cap and like it a bunch.

 

[Turbo6Smackdown]

Can you tell me a bit more about this cap? And what it did for you?

 

[T- Type Tim]

Can you tell me a bit more about this cap? And what it did for you?

The cap has slotted mounts which allow for adjustment without loosening the cam sensor itself. Even though mine was adjusted properly with voltage readings, I still had to make a small adjustment to get rid of the stumble. The cap made that process much easier.

HTH

 

[Turbo6Smackdown]

Is there something on my car that I have to take off in order to install this? Is this unit still made?

 

[T- Type Tim]

Is there something on my car that I have to take off in order to install this? Is this unit still made?

Removed old cap
install this one

http://www.casperselectronics.com/store2/product_info.php?products_id=1339

 

[TurboSmart]

How do I check if the cam sensor is ok or 180 off?