My TURBO6 project

[movinfast]

Are you putting a cage in this car or planning any hard launches?

No cage. Maybe some hard launches


Sent from my iPhone using Tapatalk

 

[movinfast]

got the drivers side notch all done! I also picked up some blazer spindles. Had my buddy sand blast them. Then I sanded them down

Sent from my iPhone using Tapatalk

 

[movinfast]

Picked up some umi Coilover only upper and lower a arms

I also got my calipers sand blasted.

Coilover comes out from the bottom so no need to take the tire and spindle off


Sent from my iPhone using Tapatalk

 

[movinfast]

14” rotors


Sent from my iPhone using Tapatalk

 

[ersim1]

Nice work! Keep it going. I have an 90k mile 86 GN that is getting a little tired...thinking about a restore but I like to drive it and I know it would take me at least 2 years.

 

[movinfast]

soon as I get the I’ll be taking the corvette logo off and putting this on

Sent from my iPhone using Tapatalk

 

[1986 Buick GX1]

soon as I get the I’ll be taking the corvette logo off and putting this on

Sent from my iPhone using Tapatalk

Very nice!!! Are those high temp decals?

I wanted to do something like that with my C5 (base) setup, but the local sign shop only had 200 deg. vinyl, so I had them make stencils and used wheel paint.

 

[movinfast]

Very nice!!! Are those high temp decals?

I wanted to do something like that with my C5 (base) setup, but the local sign shop only had 200 deg. vinyl, so I had them make stencils and used wheel paint.

View attachment 345477

No they are not. I’m getting the caliper Powdercoated then outing the sticker on. Then I’m getting a clear coat Powdercoat over it all to seal it


Sent from my iPhone using Tapatalk

 

[movinfast]

Very nice!!! Are those high temp decals?

I wanted to do something like that with my C5 (base) setup, but the local sign shop only had 200 deg. vinyl, so I had them make stencils and used wheel paint.

View attachment 345477

How do you like the stopping power of those? You ever thought about upgrading? Those look nice too


Sent from my iPhone using Tapatalk

 

[1986 Buick GX1]

How do you like the stopping power of those? You ever thought about upgrading? Those look nice too


Sent from my iPhone using Tapatalk

I upgraded from stock to these with ceramic pads. I haven’t run them yet. I want to modify the rear SSBC brackets so I can run off the shelf ‘86 C4 11.5” front rotors (on the rear) instead of turning them down to 11.1” as per their kit. I’m doing other upgrades while I’m at it and waiting on wheels. Thank you.

 

[movinfast]

I finally finished the brakes set up 6 pistons for the front. I put a video up on YouTube.


Sent from my iPhone using Tapatalk

 

[Geezy]

I finally finished the brakes set up 6 pistons for the front. I put a video up on YouTube.


Sent from my iPhone using Tapatalk

I have those front and rear! Stops really well and looks killer!


Sent from my iPhone using Tapatalk

 

[Geezy]

I have those front and rear! Stops really well and looks killer!


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[movinfast]

Sent from my iPhone using Tapatalk

Lol I learned it from watching ok! (Old pot commercial) but I’m stepping it up and doing ) pistons on the rear also [emoji48]


Sent from my iPhone using Tapatalk

 

[movinfast]

Lol I learned it from watching ok! (Old pot commercial) but I’m stepping it up and doing ) 6 pistons on the rear also [emoji48]


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[movinfast]

Frame all done. Off to Powdercoat.

No more factory welds.

Sent from my iPhone using Tapatalk

 

[movinfast]

Up next

Sent from my iPhone using Tapatalk

 

[movinfast]

Turbo 6 is back from Powdercoat!!!

 

[movinfast]

Slowly I have been busting out parts I purchased thru out the years

 

[movinfast]

I’ve been working in the rear end also!