- Joined
- Jun 28, 2001
My TSM build thread
- Thread starter sackracing
- Start date
Jason McClure
Member
- Joined
- Nov 10, 2011
Very Nice!
- Joined
- Jun 28, 2001
- Joined
- Jun 28, 2001
gnloyalty8777
Member
- Joined
- Nov 26, 2011
Looks good dude
- Joined
- Jun 28, 2001
legal to 8.50
- Joined
- Jun 28, 2001
- Joined
- Jun 28, 2001
The paint is rustoleum hammered black, put it on with foam brushes and a foam roller. Looks real good in spots and not so good in others. No turning back on it now though. Painted the seat mounts with the same paint last night. The Kirkey seat covers are really close in color to the cage and the headliner and door panels are getting covered in the same material.
The lower a arms are off right now and I'm putting more spring in the front, it will be at least a month before it is on the ground with the wheels.
The lower a arms are off right now and I'm putting more spring in the front, it will be at least a month before it is on the ground with the wheels.
- Joined
- Jun 28, 2001
Backed up and started over on fuel system. I tried to save money on hose and fittings and wasn't happy with how it ended up.
Running 2 #8 hoses from cell to -12 filter, out of pump thru -10 filter and check, -10 to just below firewall and #8 dual feed to fuel rails.
Pump and inlet filter in trunk, outlet filter and check under car.
Went with Russell proclassic hose and ends this time.
Running 2 #8 hoses from cell to -12 filter, out of pump thru -10 filter and check, -10 to just below firewall and #8 dual feed to fuel rails.
Pump and inlet filter in trunk, outlet filter and check under car.
Went with Russell proclassic hose and ends this time.
- Joined
- Jun 28, 2001
3 sets of front springs, 2 sets of shocks and 1 set of QA1 R series coilovers later, I have the ride height that makes me happy.
The rear has Wolfe adjustable perches and uses 2.5 QA1 coilover springs.
The rear has Wolfe adjustable perches and uses 2.5 QA1 coilover springs.
- Joined
- Jun 28, 2001
FastDiesel
Member
- Joined
- Jun 28, 2010
what rear tire size is that looks sweet.3 sets of front springs, 2 sets of shocks and 1 set of QA1 R series coilovers later, I have the ride height that makes me happy.
The rear has Wolfe adjustable perches and uses 2.5 QA1 coilover springs.
- Joined
- Jun 28, 2001
275/60 hoosier radial
GetOwnedVette
Active Member
- Joined
- Jun 13, 2006
Fit no problems huh? Same tires I was looking to scoop up.
- Joined
- Jun 28, 2001
They're on 10 inch wheels with a 5 inch backspace. Frame is notched.
Pittsburghkid
Displacement Replacement.
- Joined
- Mar 22, 2009
so what front springs did you go with, or are you using the coilovers?
- Joined
- Jun 28, 2001
QA1 R series coilovers with 350 lb. springs on the front.
Similar threads
