Looking for roller camshaft

Loosenut

Member
Looking for a 220-224 roller cam for 109 block.

Will consider something close. Looking to upgrade from 212-212.

Thanks,

Andy
 

mblum

NOOB
While speaking to David Husek about a tranny rebuild I thought he said he had a few roller cam cores. This was about 6 weeks ago. I may be mistaken but worth a shot.
 

Loosenut

Member
Dave Husek still has cams . I saw him and the cams yesterday !
Shop # 516-285-1103
I've talked to Dave. He has some cams in motors that are kinda sold but not really but he might be able to sell one....

He doesn't have what I'm looking for.

Thanks though.
 

TurboWh1

Active Member
Not sure if this would help you.... I have a used 221/221 Hydraulic roller. It's made of 5160 material. This cam does require the nose hardware. I'm going a different direction with my build so I do not need this. Might be good candidate for regrind if nothing is available.
 

Attachments

  • IMG_20220805_124901223~2.jpg
    IMG_20220805_124901223~2.jpg
    1.1 MB · Views: 17

Loosenut

Member
Not sure if this would help you.... I have a used 221/221 Hydraulic roller. It's made of 5160 material. This cam does require the nose hardware. I'm going a different direction with my build so I do not need this. Might be good candidate for regrind if nothing is available.
I appreciate the offer but that won't work. The motor is going to be back together and running Thursday. I'll have to go with what I've got for now.
 
Top