Long Block, Weld RTS and other stuff.

RED LS1

SENIOR MEMBER
Joined
Dec 31, 2001
-Full set of Weld RTS wheels. Great set of wheels for the track. They have some fading to the black but still look good and polish up well. Mickey Thompson street Radial tires in good condition front and back. 275-50-15. Plenty of life for the track. The best measurement I can get from the rear wheels is 15x9 with 4.5” backspacing. Weld uses funny measurements so they are probably their 9.330 they advertise not sure. I had them on a Buick GN and had to use a small spacer. A 1/8 would be perfect.

-3.8 (109) engine Long Block. Stock crank, rods and Pistons freshen up with new King bearings in 2012. Although this ran good in my car with no issues I’m advertising it as “should be freshened up again.” It’s a used engine and I don’t want to sell anyone a problem motor. Compression was around 115-125 across the board. Rare Bowling green customs deep pan, comp 212 flat/T cam, Comp double roller timing set, ARP main studs and head studs. Cometic gaskets, King bearings. Complete OEM heads that are suppose to have light port cleanup and Good valve springs. H&R mounts are not included. $1800 picked up.

-Factory headers and crossover ( drivers sided welded) 175
-Upper water pump pulley 30
-Lower crank pulley 75
-Balancer 80
-AC Y bracket 30
-coolant tube for intake 60
-Coil pack bracket (both pieces) 50
- 60lb injectors I bought new from TT in 2012 and Chip I bought from TT in 2017 that matches. $100.
 

Attachments

  • 62638440_2356416281259997_2003963454628560896_n.jpg
    62638440_2356416281259997_2003963454628560896_n.jpg
    108.9 KB · Views: 149
  • 64327354_2356416244593334_7240750214590496768_n.jpg
    64327354_2356416244593334_7240750214590496768_n.jpg
    74.2 KB · Views: 144
  • 64330440_2356416231260002_6411990181238276096_n.jpg
    64330440_2356416231260002_6411990181238276096_n.jpg
    126.5 KB · Views: 141
  • 64605426_2356416237926668_1159976228908695552_n.jpg
    64605426_2356416237926668_1159976228908695552_n.jpg
    115 KB · Views: 137
Wheels
 

Attachments

  • 62484777_2356421307926161_5949063084063588352_n.jpg
    62484777_2356421307926161_5949063084063588352_n.jpg
    99.6 KB · Views: 132
  • 62490681_2356421301259495_4396240636269821952_n.jpg
    62490681_2356421301259495_4396240636269821952_n.jpg
    56.3 KB · Views: 141
  • 64271838_2356421314592827_7058887636986888192_n.jpg
    64271838_2356421314592827_7058887636986888192_n.jpg
    132.4 KB · Views: 151
  • 64347251_2356421284592830_7594665711738290176_n.jpg
    64347251_2356421284592830_7594665711738290176_n.jpg
    117.9 KB · Views: 147
Here is the pic for that. If you're interested feel free to shoot me a PM.
 

Attachments

  • IMG-0804.JPG
    IMG-0804.JPG
    1.7 MB · Views: 77
Didn't see a price on the wheels and tires but I'd take the fronts if the price is right and you are willing to separate. Shouldn't be too bad to ship the fronts.

Sent from my SM-G965U using Tapatalk
 
Wheels are supposed to be $1200. Not sure how I missed that. I'm in S.E PA and don't want to break the set. I'm near you on the PA side of the Commodore Barry Bridge.
 
Wheels are supposed to be $1200. Not sure how I missed that. I'm in S.E PA and don't want to break the set. I'm near you on the PA side of the Commodore Barry Bridge.
Ok, thanks. Yeah, I'm just looking for a set of skinnies to toss on once or twice a year for the track. Nothing fancy. Glws.

Sent from my SM-G965U using Tapatalk
 
Wheels and injectors are sold. Long block available and will likely be breaking it down this week if it doesn't sell.
 
Top