JUNK AC hose assembly

[TR Custom Parts]

For an 87, just need the section from the compressor to just past the high pressure fitting a few inches past the compressor. Threads on the fitting the high pressure switch must be in perfect condition. Tightened mine too much and stripped the threads and lost my charge about two years later. Figure I can get that fitting welded on to my otherwise fine hose setup.

 

[Chuck Leeper]

Mark, VA has most any/all weld ins, you may need.
Take a look at this link.
https://www.vintageair.com/hose-kit...ne Kits&subcat2=Weld-In Service Port Fittings

 

[TR Custom Parts]

Didn't see any R12 fittings on there. This has external threads.

 

[wdxwrx]

I have what you need.

Garry

 

[TR Custom Parts]

Email me at mhueffman@snet.net

 

[TR Custom Parts]

This is all I am looking for. The section from the compressor just past the shrader valve. Will have my welder remove my stripped
one and weld another one in

 

[flbuick]

Pm sent

 

[TR Custom Parts]

Big thanks to wdxwrx who actually dropped the piece I needed off at my doorstep! Much appreciated!