Hydroboost upgrade help

Made a Bracket that bolted to the PSC and then used a bolt that was on the inner fender
Added a second plate that went under the window washer tank
 
I made a mock up mounting bracket from PVC angle stock (it was easy to cut & shape) , attached it to the factory PS reservoir support bracket on the fender.
After massaging the shape till I was happy with the fit , I copied this to a piece of aluminum angle from Lowe’s / Home Depot.
Will re-post some pics since they were lost when this site crashed
 
I made a mock up mounting bracket from PVC angle stock (it was easy to cut & shape) , attached it to the factory PS reservoir support bracket on the fender.
After massaging the shape till I was happy with the fit , I copied this to a piece of aluminum angle from Lowe’s / Home Depot.
Will re-post some pics since they were lost when this site crashed
Here are some pics
 

Attachments

  • 84D808E7-0160-4826-9C8A-F0A0E6A6C5D1.jpeg
    84D808E7-0160-4826-9C8A-F0A0E6A6C5D1.jpeg
    191.3 KB · Views: 62
  • 3FE73567-07FC-4160-BC85-018F7E2C3ED3.jpeg
    3FE73567-07FC-4160-BC85-018F7E2C3ED3.jpeg
    41.7 KB · Views: 56
  • E6B92430-83ED-46A8-B671-5680CAFD86E8.jpeg
    E6B92430-83ED-46A8-B671-5680CAFD86E8.jpeg
    70.7 KB · Views: 57
  • B3FD08C2-E34C-49FC-937D-798161726CA1.jpeg
    B3FD08C2-E34C-49FC-937D-798161726CA1.jpeg
    91.6 KB · Views: 59
Looks great, thank you very much for the pictures! I'll do the same this winter.
 
Top