Heads, posi, axles and loop

[toomanymodz]

Stock cylinder heads, rebuilt by Scotty's with only 400 miles on them.
Beehive springs are for standard hydraulic camshaft (not for a roller cam).
Stainless under-cut valves. Ready to install. $500/pair

Moser Axles, 28 spline
Comes with racing studs (factory metric threads). $175/pair

Factory posi-traction. Comes with carrier bearings. $225

Driveshaft safety loop $30

Prefer local pickup (Spring Hill, Florida) but can ship if necessary (buyer pays shipping).

 

[TURBOTIMMER]

Tom Robison was looking for a Posi unit in the parts wanted.

 

[HUENEMEGN]

Ill take the driveshaft loop . PayPal ready

 

[toomanymodz]

Ill take the driveshaft loop . PayPal ready

You're second in line for the loop. Will let you know soon...

 

[83StreetMachine]

Paypal already sent for the driveshaft loop

 

[V6UnderPressure]

interested in axles 200 shipped ?

 

[toomanymodz]

200 shipped sounds good. i'll PM you my info.

 

[toomanymodz]

Safety loop as been sold.

Heads, posi and axles are still available.

 

[LANDAU LIMITED]

How old and how many miles/passes are on the axles? How much power did the car have they were in?

Thanks, John V.

 

[toomanymodz]

How old and how many miles/passes are on the axles? How much power did the car have they were in?

Thanks, John V.

They have about 5k miles on them. About 20 passes. Best of 10.67. The fastest 60ft was 1.58 sec.

 

[vidal_felipe]

Do you have any head bolts from a 86 or 87.. The ones that have marked on the heads:
SPS and the long ones that have a C?
Does not matter if they have been removed once.
Let me know.

 

[toomanymodz]

I only use ARP head studs. Sorry.

 

[LANDAU LIMITED]

Thanks for the info, I'm definitely interested.

 

[muddin'metal]

PM sent

 

[toomanymodz]

Axles are sold. Heads and posi are still available.

 

[toomanymodz]

Stock cylinder heads, rebuilt by Scotty's with only 400 miles on them.
Beehive springs are for hydraulic lifter camshaft (not for a roller cam).
Stainless valves with high-flow under-cut stems.
Ready to install. $475/pair

Factory posi-traction. Comes with carrier bearings. $200

Prefer local pickup (hour North of Tampa FL). Buyer pays shipping.

 

[tom robison]

I’ll go 200.00 shipped on the posi. Let me know.

 

[toomanymodz]

I’ll go 200.00 shipped on the posi. Let me know.

Shipping will cost me about $55. That doesn't leave much meat on the bone. I'll do 225 shipped.

 

[tom robison]

Let me know if you change your mind.

 

[toomanymodz]

Heads and posi are sold.