GSCA email just dropped

sdteb

trying to get it like you
if unplugging the cam sensor while running the car dies...is that a bad cam sensor? or set wrong?
 

Chuck Leeper

Toxic old bastard
Staff member
What do you have for scan tool?
Details on the engine and such.
Cold, KOEO readings?
Cold start running and driving scan readings are?
Warm, KOEO readings?
Warmed up, running and driving readings are?
 

TexasT

Texas, Where are you from
Stock maf? Have you done the tapping on it to see about it? Not fool proof but if it stumbles you know you need deeper thought on it.
 

sdteb

trying to get it like you
What do you have for scan tool? scan master
Details on the engine and such. rebuilt by previous owner, nothing crazy, i can take a pic of them, 212 roller
Cold, KOEO readings? ill post the video of the readings
Cold start running and driving scan readings are?
Warm, KOEO readings?
Warmed up, running and driving readings are?
 

sdteb

trying to get it like you
the numbers look good, with the exception of the blm's a little high at idle, 142, driving it cleans up, havent found any vacuum or exhaust leaks to speak of
 

GNRick

Retired member
I think it should stay running. My car died out at a light. Was hard to start. Got it home. Changed every sensor/module except for cam sensor. Turned out to be crank sensor.
 
Top