go Fast stuff

[TURBOTIMMER]

Stock champion ported lower intake manifold. In great shape. $400 shipped in the lower 48

ATR/Kenne Bell style stainless headers. I’m not sure who made these, as I bought them used, but they fit well and zero leaks. These are not the cheap Chinese headers you see on eBay. Crossover has been welded solid at the joint. Comes with 2 v-band clamps.

Also have a 3” internal gate downpipe that I made. All stainless mandrel bends and an RJC flange. Some of the welds aren’t the prettiest as I was thrashing to get the car ready for the North Carolina event last year. This pipe was made to clear the above headers, and some trimming of the inner fender is needed. Will sell the headers and downpipe for $700 + shipping. Pics coming

 

[GN GURU]

Pics of lower intake plz


Sent from my iPhone using Tapatalk

 

[TURBOTIMMER]

It will be a bare manifold. I’m transferring everything over to a stock engine.

 

[Trashman]

In line for intake, how are all the threaded holes? How many have heli coils?

 

[TURBOTIMMER]

In line for intake, how are all the threaded holes? How many have heli coils?

No idea. I can look better at it tomorrow. My engine was the first it’s been on since it was done by champion, and all the threads are fine.

 

[greeneyegi]

Interested in just headers

 

[TURBOTIMMER]

Interested in just headers

$400 +shipping on the headers. Here’s a pic of them. I can get a pic of the crossover in the am.

 

[mxdoc29]

I'd be interested in the crossover if I can verify it would mate up with atr headers.

 

[TURBOTIMMER]

I'd be interested in the crossover if I can verify it would mate up with atr headers.

Selling the headers and crossover all together.

 

[83 intercooled]

I will take intake if still available

 

[TURBOTIMMER]

Intake is sold and shipped.

 

[626gn]

$400 +shipping on the headers. Here’s a pic of them. I can get a pic of the crossover in the am.

Would you know if those headers will clear a 3" ATR Downpipe?

 

[TURBOTIMMER]

Would you know if those headers will clear a 3" ATR Downpipe?

Really depends on the downpipe. I’m not sure about ATR, but Houston made a version for stock headers and one for these style.

 

[TURBOTIMMER]

Pics of the crossover and downpipe.

 

[TURBOTIMMER]

Also have a 70mm throttle body and precision plenum. At one time the throttle body had a vibrant billet clamp on it. I smoothed it out the best I could and used a regular hose with a heavy duty clamp. Still held 26 psi no problem. See pics. TPS and IAC will be removed. $325 shipped to the lower 48.

 

[Darth Vader 1]

Stock champion ported lower intake manifold. In great shape. $400 shipped in the lower 48

ATR/Kenne Bell style stainless headers. I’m not sure who made these, as I bought them used, but they fit well and zero leaks. These are not the cheap Chinese headers you see on eBay. Crossover has been welded solid at the joint. Comes with 2 v-band clamps.

Also have a 3” internal gate downpipe that I made. All stainless mandrel bends and an RJC flange. Some of the welds aren’t the prettiest as I was thrashing to get the car ready for the North Carolina event last year. This pipe was made to clear the above headers, and some trimming of the inner fender is needed. Will sell the headers and downpipe for $700 + shipping. Pics coming

Stock champion ported lower intake manifold. In great shape. $400 shipped in the lower 48

ATR/Kenne Bell style stainless headers. I’m not sure who made these, as I bought them used, but they fit well and zero leaks. These are not the cheap Chinese headers you see on eBay. Crossover has been welded solid at the joint. Comes with 2 v-band clamps.

Also have a 3” internal gate downpipe that I made. All stainless mandrel bends and an RJC flange. Some of the welds aren’t the prettiest as I was thrashing to get the car ready for the North Carolina event last year. This pipe was made to clear the above headers, and some trimming of the inner fender is needed. Will sell the headers and downpipe for $700 + shipping. Pics coming

shipping to 14303 and how do you want to be paid

 

[TURBOTIMMER]

For which parts?

 

[Darth Vader 1]

Intake

 

[TURBOTIMMER]

Intake

Already sold

 

[Darth Vader 1]

thanks for getting back to me