Gn motor, 3"downpipe and exhaust

meaclez

Member
Joined
Sep 5, 2007
im not 100% on the mileage but im pretty sure its around 95 before it was apart

ARP main and rod bolts (under 200 miles)
fresh king main and rod bearings (same as arp hardware)
the crank is std/std
new lifters
stock rods/pistons
stock heads/cam
Rjc powerplate
ported upper plenum
mallory adj fuel pressure reg (under 300 miles)
the headers have been milled and welded so they are pretty damn good
50lb injectors
mini starter
percison turbo turbo saver/ filter relocation kit

asking 1600 for the above

mease 3" downpipe - 300$

hooker 2.5 exhaust - 250$

i have a start up vid and some other vids of the motor a week before it came out

pics upon request
pm is key guys thanks.
 
pm sent but i have a feeling im going to get more of those

i live in windsor ontario canada..which is right next to detroit michigan.

will meet have way or we can work something out for people who actually want the motor
 
interested in the down pipe can you send me pics

im not 100% on the mileage but im pretty sure its around 95 before it was apart

ARP main and rod bolts (under 200 miles)
fresh king main and rod bearings (same as arp hardware)
the crank is std/std
new lifters
stock rods/pistons
stock heads/cam
Rjc powerplate
ported upper plenum
mallory adj fuel pressure reg (under 300 miles)
the headers have been milled and welded so they are pretty damn good
50lb injectors
mini starter
percison turbo turbo saver/ filter relocation kit

asking 1600 for the above

mease 3" downpipe - 300$

hooker 2.5 exhaust - 250$

i have a start up vid and some other vids of the motor a week before it came out

pics upon request
pm is key guys thanks.


interested in the down pipe can you send me pics to labotella69@yahoo.com
 
Top