gbodyparts avoid at all costs

1KWIKSIX

Well-Known Member
Joined
Sep 29, 2007
I’ve got one of Coach’s stainless steel oil pump booster plates (believe it’s a copy of Kenne Bell’s ) but made in SS.
My instructions for machining the pump housing is not very legible. Am looking for a copy that clearly shows the dimensions.
Would appreciate a copy if anyone who has done this modification can share a PDF file with me.

Thanks
Dave
 
Here you go. I've done 4 or 5 of these over the years. They work great. I haven't done a Coach plate yet, but I have one and I think it is the same as the KB. The second PDF is upside down. You will have to cut the gasket as shown to get the oil to bypass.
 

Attachments

  • DSCN0265.JPG
    DSCN0265.JPG
    1.3 MB · Views: 189
  • DSCN0266.JPG
    DSCN0266.JPG
    1.4 MB · Views: 174
Here you go. I've done 4 or 5 of these over the years. They work great. I haven't done a Coach plate yet, but I have one and I think it is the same as the KB. The second PDF is upside down. You will have to cut the gasket as shown to get the oil to bypass.

Thank you Sir! Much appreciated. Much clearer now.:)
 
Top