Brian Collins
New Member
- Joined
- Nov 5, 2004
I have a lot of parts from an 87 GN to sell. I was going to swap the motor into another car but I have since lost intrest. No luck selling everything together so here's everything broken up a little more.
$2000 takes
- Block w/ rotating assembly
- Heads
- Lifters and push rods
- Water pump, ac compressor, power steering pump, alternator
- Intake w/ fuel rail
- Trans (BFR code) w/ shift kit and recent rebuild
- Trans shift cable, shifter, and cross member
- Drive shaft
- Torque converter, flex plate, and starter
- Turbo (needs a rebuild)
- Intercooler w/ all plumbing
- Harness w/ every plug marked
- Headers, crossover, downpipe, and test pipe
- Entire AC including the HVAC box & controls
- New motor mounts
- Walbro pump w/ hotwire only 100 miles
- Cable w/ usb adapter and free turbometer software
- Boost gauge
- Two stock MAF’s
- elect. fan
$750 for posi read end complete to tires w/ control arms and sway bar
$200 for trans+ w/ 3" LT1 MAF and extender chip
$150 for hood, slight rust on underside, no dents
$100 for header panel
$10 both fenders
$20 both door windows
$15 carpet
$400 from and back seats 80km no rips or stains, slight seperation around bead of driver seat
$150 Dash w/ grey part that goes around radio also
$100 both door panels
I live in Boise, ID and can arrange to deliver to meet with in 6 hours. I can also ship the small parts. Please feel free to give me a call at 208 599 1118
$2000 takes
- Block w/ rotating assembly
- Heads
- Lifters and push rods
- Water pump, ac compressor, power steering pump, alternator
- Intake w/ fuel rail
- Trans (BFR code) w/ shift kit and recent rebuild
- Trans shift cable, shifter, and cross member
- Drive shaft
- Torque converter, flex plate, and starter
- Turbo (needs a rebuild)
- Intercooler w/ all plumbing
- Harness w/ every plug marked
- Headers, crossover, downpipe, and test pipe
- Entire AC including the HVAC box & controls
- New motor mounts
- Walbro pump w/ hotwire only 100 miles
- Cable w/ usb adapter and free turbometer software
- Boost gauge
- Two stock MAF’s
- elect. fan
$750 for posi read end complete to tires w/ control arms and sway bar
$200 for trans+ w/ 3" LT1 MAF and extender chip
$150 for hood, slight rust on underside, no dents
$100 for header panel
$10 both fenders
$20 both door windows
$15 carpet
$400 from and back seats 80km no rips or stains, slight seperation around bead of driver seat
$150 Dash w/ grey part that goes around radio also
$100 both door panels
I live in Boise, ID and can arrange to deliver to meet with in 6 hours. I can also ship the small parts. Please feel free to give me a call at 208 599 1118