comp 981 springs for 206/206 roller for iron heads

[sdteb]

anyone have these for sale?

 

[pacecarta]

for a roller with .496 lift (using 1.55 ratio rockers) and turbo . for a 206 flat they ould be ok but i wouldnt go to them for a roller
thats a 105lb seated pressure spring at 1.70 with a 1.15 bind good for .490 lift , if you shim them down to get higher seat pressure they will go to bind
summit has them in set of 12 but you need more seat press

 

[sdteb]

so which ones should i purchase? i was probably going to use stock rockers,

 

[pacecarta]

champion usually supplies their irons with kmotion K750 which lists as a 130# at 1.70 485# rate 1.05"coil bind
installed at 1.65 with a shim should get approx 155# at seat and still be safe to avoid coil bind
hopefully you have your guides cut down for roller cam lift or youll hit the guides

 

[J-B Racing]

941-12

 

[black owned]

941-12

So these will work with a comp 206 roller?

 

[J-B Racing]

They should, used them before

 

[bison]

anyone have these for sale?

Verify lobe lift before selecting any spring


Sent from my iPhone using Tapatalk

 

[sdteb]

Verify lobe lift before selecting any spring


Sent from my iPhone using Tapatalk

Advertised Intake Duration: 258
Advertised Exhaust Duration: 258
Intake Duration at .050 Inch Lift: 206
Exhaust Duration at .050 Inch Lift: 206
Intake Valve Lift: 0.496
Exhaust Valve Lift: 0.496
Lobe Lift Intake: 0.32
Lobe Lift Exhaust: 0.32
Lobe Separation: 110
Intake Centerline: 110

would the comp 6853-12 lifters work as well?

 

[Jerryl]

would the comp 6853-12 lifters work as well?

You may not know this, but you can purchase the correct springs, pre-measured, from bison.
PM him for info.

 

[pacecarta]

bison should have johnson lifters , the 653 are std travel and without doing adjustable rockers you dont want to try limited travel due to fact youll need to be much closer on the pushrod selection ..you will need to assemble with your chosen lifter and only then measure for pushrods

 

[robzombie]

I have a NIB set of kmotion K750 if you need them.