Champion Irons, T+D roller rockers, DLS roller cam

jdpolzin

Well-Known Member
Joined
Dec 5, 2004
Hey guys, I down graded my set up so putting the heads and cam up for sale. Everything has 600 miles on them.

Champion CNC Ported Irons
----set up for the roller with roller springs (sale pending)

...
T+D 1.55 roller rockers (sale pending)

DLS roller 210/210 or Comp roller 212/212 cam (sale pending on comp roller set)

Comp chromollly 8.225 .080 HD pushrods

Comp Roller lifters

These were on my 109 with Cometic Headgaskets. I ran my 6765 turbo with these and the car was very strong! $2500 for everything
 

Attachments

  • 27797536_10213358255964261_6826125096204494250_o.jpg
    27797536_10213358255964261_6826125096204494250_o.jpg
    179.6 KB · Views: 185
  • 27788578_10213358260644378_9200347825179645634_o.jpg
    27788578_10213358260644378_9200347825179645634_o.jpg
    189.9 KB · Views: 171
  • 27867790_10213358265084489_8033577908132796195_n.jpg
    27867790_10213358265084489_8033577908132796195_n.jpg
    41.9 KB · Views: 172
  • 27788704_10213358263244443_1433581439646598258_o.jpg
    27788704_10213358263244443_1433581439646598258_o.jpg
    156.2 KB · Views: 164
  • 20180209_110956.jpg
    20180209_110956.jpg
    4.2 MB · Views: 103
Last edited:
Are you willing to separate? I would possibly be interested in the heads. I just talked to Tom at Champion on Thursday about a set of irons.
 
Not including shipping. I believe I have the cam card but will need to look for it.
 
Interested in cam so a cam card would be nice. Cam say 210?


Hey Ed, after looking at my notes, your right. The cam is a 210/210. For some reason I had it in my mind that it was a 218! I don't have the cam card, just the specs written. I also have a comp 212/212 roller set available.
 
I will split these items up but wont sell the heads until one of the cam sets and the rockers are sold.

Each cam set (cam, lifters, pushrods) $550

Rockers $550
 
Heads, the 212/212, rockers, and pushrods are sold.


I may end up selling the DLS cam set, but haven't decided which way I want to go on my next build.
 
Top