cam sensor

[bob brady]

need the shaft, as i broke the screw in mine while attempting to upgrade the cup.

 

[reggie44]

Bob, sorry I don't know the e-bay # but there is a NOS one on e-bay right now and I believe it is one of the Members from here. Good luck.

 

[turbo nasty]

need the shaft, as i broke the screw in mine while attempting to upgrade the cup.

A machine shop can get the remainder of the screw out. Heat the shaft up to temp to defeat the loctite on the screw before removing it.

 

[turbo nasty]

need the shaft, as i broke the screw in mine while attempting to upgrade the cup.

Another option, I rebuild these and can rebuild it for you as well. Including the broken screw removal. Thanks

 

[bob brady]

i broke a small drill bit inside the screw

 

[Fat Nat]

I have a few shafts I believe. I’ll check when I get to the shop

 

[Fat Nat]

I have a few shafts I believe. I’ll check when I get to the shop

Or I have a complete cam sensor with cap for 100.00