4.010” Diamond Pistons on 6.5” Oliver rods

CornFed

New Member
Joined
May 11, 2015
For sale is the backup set of rods and pistons from my stage 2 car. Pistons/rods were run in a 153 in center motor. Pistons are a 4.010” bore with a 23cc dish and rods are Oliver 6.5”. I only have 5 rods complete with pistons but also have 2 brand new Diamond pistons that come with the sale. Pistons and rods are clean with no defects, but they are used so donahow average wear.
$650 for all of it
 

Attachments

  • B351E768-D6CF-4CB8-8259-843067F56488.jpeg
    B351E768-D6CF-4CB8-8259-843067F56488.jpeg
    1.7 MB · Views: 43
  • D5159993-DCF1-464C-84A5-387050761DCC.jpeg
    D5159993-DCF1-464C-84A5-387050761DCC.jpeg
    1.1 MB · Views: 43
  • 5962082A-07ED-401B-88F0-018381FA21CC.jpeg
    5962082A-07ED-401B-88F0-018381FA21CC.jpeg
    1.1 MB · Views: 42
  • 89A1B735-FE19-479C-BB9F-7DEFE7C81F0F.jpeg
    89A1B735-FE19-479C-BB9F-7DEFE7C81F0F.jpeg
    1.1 MB · Views: 40
  • F24E3168-1B63-482B-BA6F-711394F37D40.jpeg
    F24E3168-1B63-482B-BA6F-711394F37D40.jpeg
    1.7 MB · Views: 40
  • 38ABDF5C-5FD4-47DE-B8DA-8A5A62A0B54B.jpeg
    38ABDF5C-5FD4-47DE-B8DA-8A5A62A0B54B.jpeg
    1.4 MB · Views: 38
I’m not sure how these where ran in a 153 block as that is a on center block and looking at your pictures these are off center rods . Anyway what happened to the 6th rod?
 
Top