26 year Parts HOARD SEPTEMBER up date Tons of New NOS Used Parts

[Intercooled88s]

I'm checking e mail now.

 

[DarthBuick]

Thats cool. I just need Paypal info. Do they have the pawl thingy the rod connects to

 

[Justa_v6]

Sent email regarding
1. Rear window 3pc blackout trim.
2. Billet horn ring.




Posted from the TurboBuick.Com mobile app[/QUOTE]



Posted from the TurboBuick.Com mobile app

 

[Stagetoko]

-nice set of 85 Maroon bucket seats $300


-New tranmission shifter cable(after market that fits properly) $18

-Turbo Riviera Turbo $200

-109 turbo block std bore $350
-Good std/std turbo crank $300

-86-87 Engine wire harness(no injector harness) $200

-New after market cruise control shifter lever $30
-Dash plaque for a GN in driver condition $40
-86-87 stock turbo, very little play $250
-84-85 stock trubo, very little play $150
- 84 GN front seats(leather and cloth) need to be recovered $200
-86-87 T-type rims(no center caps) $300 for 4 or 1 for $100
-BRF 200 4r $500
-NOS Turbo 6 emblem $50 Free shipping

-86-87 original MAF(not Rem.) $90
-86-87 AC compressor $100
-87 Intake manifold(lower intake and upper dog house) $200
-Rad hold down plate $35
-Front license plate bracket $20

-Doors $300 for set(1 pass and 1 drivers) Pick up only, I wont ship these.
-Vac brake set up $125(master cylinder, power brake booster, and correct pedal)
-87 442 Passenger side New rear quarter -Make Offer
-gray 87 442 bucket seats $250
-locking T-tops $200 a set

-84-87 Nice Header panel (Hole for emblem has been filled) $200
-GN driveshaft $75


-84 NA 3.8 Engine complete runs good 290 block $250
-84 turbo Regal block .030 over $150
-85 Turbo Regal Block .030 over $150
-109 turbo block std bore $350
-109 turbo block .060 over $100
-Turbo crank(Std/Std but will need to be turned at most .010.010) $250
-Under drive crank pulley and alt pulley $40


-Nice set of GN tail lights with blackout trim $160
-84-86 GN Power seat track assembly $150
-Floor brackets for console $30
-Floor pan for bucket seat car $150 picked up only
-Rear quarter $250 each picked up only
-Rear frame rails $100 each
-Front frame rails $100 each
-Control arms(Front lower)$60
-Control arms(Front upper)$30
-Motor mounts(metal, frame mounts) $35


-84-85 Flex cooling fan $10
-85 Power steering pump(For car with power master) $30
- trans cooler $20
-B body spindles $50 for pair

-85 Gray bucket seats $250 good condition

-Crank window regulators $50 for both doors
-Dash vents(with nice chrome) $20 each
-Nice Gray card board and cloth inserts(under quarter windows) From 85 T-type $30 for both
-Gray dash pad with a small hole drilled at the lower right of the drivers seat(Its not even noticable) $75

-Chrome marker light $35 each
-Both front head light bezels(need to be painted) $70 for both
-Rear center filler(The part that the rear license plate bracket attaches to) $30
-Pass remote mirror bracket(Just the bracket that attaches to the dash) $15
-NOS black plastic seat track cover for rear right side(GM part # 20023766) $20

-heater box shield $15
-84-85 Shield to cover heat hoses $15
-bumperette rubber strips in good condition(used GM not after market) $20 each
-Stock factory lighter $8
-Stock Battery hold down $10
-Connecting Front Brace $25
-Front frame braces(underside) $25
-Plastic Brackets to mount front air dam $30 for 2(For both sides)
-Good hood shocks $10
-Stock turbo inlet bell $20
-86-87 engine hoist bracket(on intake) $20
-87 gray cloth Limited front and rear seats $200
-87 gray column (shift on column) $100
-87 Split bench seat power seat track assembly $100

-Original GN Quarter extensions for car with spoiler $40
-84 Red upper door panels $80 minus chromegray strips $50
-Grey T-type upper door panels no chrome strips $50
-87 Maroon upper door panels $50
-Drivers side Blackout head light bezel $40
-Chrome head light bezels painted black $40 for both
-Black trim Marker lights $40 each
-Blackout wheel well moldings $30 each
-Chrome(Regal) wheel well trim moldings $40 each
-84-87 T-type header panel with hole filled $150
-84-87 T-type GM header panel, has some small imperfections $125
-84-87 Grand National GM header panel, has imperfections $125
-Passenger remote mirror(needs paint) $60
-87 GN seat belt set(10 pieces) $150
-84 GN steering column with tiltcruise $150
-Maroon steering column with tilt cruise $150
-87 GN grey column with tiltcruise $150
-87 grey column(shifter on the column) $100
-84 Blue column(shifter on column) $100
-84 tan bucket seats $250 with rear seats $300
-86 blue 86 442 bucket seats $200
-85 Gray 442 bucket seats $200
-Gray Monte SS bucket seats $200

 

[Stagetoko]

I have 84 Gn . Iam looking front and rear seats it has leather and cloth material.

 

[STF420@comcast.]

PM sent

 

[sdteb]

will you be at BG?

 

[Intercooled88s]

will you be at BG?

Sorry I won't.

 

[Intercooled88s]

I have 84 Gn . Iam looking front and rear seats it has leather and cloth material.

Sorry don't have them.

 

[VtheGNMan]

Do you have a good lower, bottom portion of a Center Council for a GN? I have a nice leather top tap, shifter plate and ash tray but the lower part was busted up in a GN I just bought. Can be grey or black.

 

[Stagetoko]

Sorry don't have them.

 

[Stagetoko]

Iam looking for 86 87 Gn roller if you ever get one let me know .I thank you in advanced

 

[Super Kaz]

Looking for a driver's side manual seat track for my 87 turbo t. Would you happen to have one?

 

[corkatoa]

-86-87 Intercooler brackets $25 each.
I have no brackets to mount intercooler. Not sure what is required. Please inform me what I need and I will send payment via paypal. Would need shipped to 83805.
I am sure I can find a few more things I need, still going over the car; mostly need parts to install 87 engine into 85 car. Have almost everything, but am still figuring it all out. But I know I need the brackets for sure.
And a set of grey visors.
And I am still going over your list. It is an amazing amount of stuff.

Thanks

 

[gsbuick65]

Do you still have spoiler?

 

[GSTOY]

I'm looking for the following parts for a 86-87 engine, 20 bolt oil pan, dipstick, intake manifold, cam sensor (whole thing) and a front accessory bracket. Let me know what you have and how much. Thanks..Steve

 

[f117v6]

I'm checking e mail now.

 

[copteaser]

Do you have the track that holds down the t top. It looks like a "T". Its sits right in the Middle of the top of the on the outside of the body.

Posted from the TurboBuick.Com mobile app

 

[VtheGNMan]

Do you have a good lower, bottom portion of a Center Council for a GN? I have a nice leather top tap, shifter plate and ash tray but the lower part was busted up in a GN I just bought. Can be grey or black.

Inquiry must have been overlooked, haven't heard anything. PM'd too.

I am looking for the lower and middle sections of the long center council on a bucket set T or GN. I have the top pad and shifter console section. Grey or black. Do you have anything?

 

[Intercooled88s]

Inquiry must have been overlooked, haven't heard anything. PM'd too.

I am looking for the lower and middle sections of the long center council on a bucket set T or GN. I have the top pad and shifter console section. Grey or black. Do you have anything?

I have the middle section $70 shipping included.