- Joined
- May 23, 2001
I am selling my Lonnie Dyers built 250ci stroker motor. I am putting my TTA back to stock as I am deeply involved with the LS1 motors now. The motor is disassembled for inspection and is flawless. I ran Calico coated bearings. This motor on 17lbs it went 10.67 at 131mph in my TTA with TTA Champion Irons, on the stock ECM with stock MAF.
BMS 3.625 Stroker Crank (NOT CHINA)
109 Block .030
Ross Pistons (9:1 with TTA heads)
K1 Big rods with ARP 2000 Bolts
RJC Girdle with ARP Main studs and hardware
There are less than 500 street miles and less than 5 passes on this motor.
All that is needed are your heads and cam/timing set to have a solid 9 second build. Everything is balanced and machined together. Selling it as a whole so buyer can assemble and drop in.
The price is firm at $3500 as this is a smoking deal.
Thanks,
Rob Hinson (334-296-1412) - Bob's Son
BMS 3.625 Stroker Crank (NOT CHINA)
109 Block .030
Ross Pistons (9:1 with TTA heads)
K1 Big rods with ARP 2000 Bolts
RJC Girdle with ARP Main studs and hardware
There are less than 500 street miles and less than 5 passes on this motor.
All that is needed are your heads and cam/timing set to have a solid 9 second build. Everything is balanced and machined together. Selling it as a whole so buyer can assemble and drop in.
The price is firm at $3500 as this is a smoking deal.
Thanks,
Rob Hinson (334-296-1412) - Bob's Son