200-R4 Tool set

turbodave231

Moderator
Joined
May 24, 2001
I am posting this to gauge interest. The package of tools and information I am looking to sell could potentially set you up in your own business rebuilding 200-4R transmissions. As you well know there are very few highly qualified techs who can properly rebuild a 200-R4 trans.

I have rebuilt MANY 200-r4 transmissions for myself and other Buick club members. I have decided that am no longer rebuilding transmissions. I have nearly every GM "J" tool needed to disassemble, reassemble, test and rebuild a 200-r4 trans. This includes the bench fixture and many other tools that I have custom made to specifically work on these transmissions.

I want to sell these tools as a package only. I will NOT sell any of these tools individually.............so don't ask.

Included are two large bins of new and used 200-R4 rebuild parts. These are NOT the "Hard Parts" like shafts, drums and gear-sets. They are "Soft Parts" like gaskets, seals, pins, spring etc.. These bins include lots of "Extras" that every rebuilder needs. Need a good band anchor? its in there. Need a check ball? or a TV valve spring? Look no further.

The parts include a rebuilt BQ valve body all cleaned and ready to install and a new Raybestos Pro band. There are MANY extra sets of seals so if you ever screw up a seal on assembly, you don't have to buy another seal kit to fix your Fck-up!

Here is a link to the pictures I've taken:

Shipping these tools and parts is going to be a costly ordeal. There is alot of metal here!!!!

You should be prepared to pick them up (Michigan) or pay Truck Freight. I have friends going to BG so it may be possible to have them delivered to the GS Nats.

I am probably under-estimating the value of this package deal, but the first $1200 takes the whole package
 
Last edited:
I am posting this to gauge interest. The package of tools and information I am looking to sell could potentially set you up in your own business rebuilding 200-4R transmissions. As you well know there are very few highly qualified techs who can properly rebuild a 200-R4 trans.

I have rebuilt MANY 200-r4 transmissions for myself and other Buick club members. I have decided that am no longer rebuilding transmissions. I have nearly every GM "J" tool needed to disassemble, reassemble, test and rebuild a 200-r4 trans. This includes the bench fixture and many other tools that I have custom made to specifically work on these transmissions.

I want to sell these tools as a package only. I will NOT sell any of these tools individually.............so don't ask.

I will get the crate out of my loft and take pictures and post them up here.


Send me a price if or when you have one. Thanks
 
I have gone thru the bin of tools and I because I have done several 700R4 -4L60 and 4L60E transmissions, (share the same basic pump design) I have most of the tools that absolutely needed to rebuild those units as well.

The first list list below covers only the 200-R4 tools in the package. The second list covers the 4L60/4L60E/700R4 tools. The 700-R4 tools are part of this package Included are two huge bins of spare 200-R4 parts. I'm including all my manuals for the 200-R4 transmission. There are plenty of notes and great info included. The price I'm asking is $1200 and I'm open to reasonable offers.




Tool NumberDescriptionIncludedCommentsUsed EBAY Price
J-29332Output shaft loading fixtureYESNeeded$67
J-25013-1Rear unit supportYESNeeded$40
J-24773-5oil pump remover screwNONot Needed
J-24773-Aoil pump remover and end play checking fixtureYESNeeded$47
J-29334Fourth clutch compressor and center support removerYESNeeded
J-29337Forward and direct unit fixtureYESNeeded$51
J-8763-02Holding fixture and baseYESNeeded$250
J-25359-3#27 Torx bitNOCommercially Available
J-26744-ASeal InstallerEQUIVALENTLip seal installation tool
J-21426Rear seal installerYESNeeded$45
J-23327Clutch spring compressorEQUIVALENT
J-25010Direct clutch seal protectorYESNeeded$23
J-25011Reverse Clutch Seal protectorYESNeeded$35
J-25014Intermediate band apply pin gageYESNeeded$40
J-25015Oil pump body and cover alignment bandYESNeeded$47
J-25016Front oil pump seal installerYESNeeded$93
J-25018-AForward Clutch spring compressor adapterNONot Needed
J-25022Oil pump end play fixture adapterYESNeeded$5
J-25025-AAlignment Pin and stud setNONot Needed
J-28542Reverse clutch housing installer and removerYESNeeded$100
J-29060Torque Converter end play fixtureYESNice to havenone available
J-7004Slide hammerNOCommercially available
J-8001Dial Indicator setYESAny indicator will do, but this is included$90
J-8092Driver handleNONot Needed
J-29696Turbine shaft seal installerYESReally needed!$35
J-41778Pump body bushing remover and installerYESReally Needed$20
Total$988

Tool NumberDescriptionUsed prices
J-44571-2Reverse input clutch seal protector$230
J-44571-1
J-36418-2ATurbine shaft seal installer and sizer$53
J-36418-1B
J-33037Band Apply Pin Gage$339
J-29883Forward Clutch seal protector$49
J-37789-APump remover$30
J-45053-1Updated Pump remover. Very universal and will work on many transmission models$119
Total$537
 
Last edited:
Shipping these tools and parts is going to be a costly ordeal. There is alot of metal here!!!!

You should be prepared to pick them up (Michigan) or pay Truck Freight. I have friends going to BG so it may be possible to have them delivered to the GS Nats.
 
The "Package includes:
200-R4 Tools
4L60/4L60e/700R4 Tools
Service Manuals specific to 200-R4
Two Huge bins of new Spare 200-R4 soft parts.
One new 200-R4 Raybestos band
One Rebuilt BQ valve body

The tools alone total $1525
 
Last edited:
Top