Search results

*AMS 1000. (MAP sensor, solenoids and control box.) 600.00 shipped to the US only. Same as above including CO2 kit (2 bottles, bottle bracket and regulator) 750.00 shipped US only. *Set of 8 , Bosch PTE 160 # injectors. Buy 6 get two spares for free. I had them on my stage2 and later on my...

1987 Buick GN roller.Owned car for 16 years. This car was one of the early TSM cars, later a TSE and TSL car. 16,500 http://s236.photobucket.com/user/9secv6/library/1987 Buick GN V8 for sale Will not part roller out. 25.5 CM/MS no cert. Set up for SBC with Glide, can be converted back to V6...

Helping my friend Highboost2000 clean out the garage of performance parts. Shipping not included on prices. Champion Intake with fuel rails and AccuFab 70mm TB - 650.00 SOLD 4 Bolt ATR Headers with ATR DP and Turbosmart Progate48mm Wastegate – 800 Precision Turbo 71HPSHDBB (PTB605-7175) - 1400...

Helping a friend clean out his garage. Used Stage II Long Block Off-Center no cam included – 9500.00 plus shipping 016 block, JE pistons, Oliver rods, eagle steel crank stock stroke. GN 1 R heads fresh back from champion. Cometics installed. Steffs Oil pan and Duttweiler system availablefor...

Used 42.5 injectors with TT street chip 200.00 plus ship New 72 # Siemens injectors.300.00 plus ship pics available Fastgn@hotmail.com

Im working on a car in which the rear brake line rusted and broke right at the trans cross member. I would like to run a new line from the prop valve back to a good un rusted section and splice the lines. Can anyone advise?

Posting for my good friend. Engine was in his weekend driver garage queen GN. Going V8-LS 10k firm, plus shipping. 016 Stage 2 Off-center long block 4.025 bore, Block was sonic checked prior to the work Never blown up, no sleeves or repairs. 3.400 Eagle Crank-.010 under 6.5 Oliver Rods...

Weldon 2035. Fresh from full rebuild from Weldon.Only has 5 passes on it. I decided to put a belt drive on it. 550.00 shipped. Pics via email. fastgn@hotmail.com

Congrats to Frank Meshaw, Mike Fratena and Cal Hartline in their double wins at the Orlando street nats. Franks fastest pass in his Outlaw 10.5 Firebird was 6.76 @ 213 clicking off early. In drag radial Mike Faternas 3rd Gen Camaro ran its best time of 7.60s at 190 MPH on 275s! with a single...

2- early design MT wheels for sale. Dual bolt pattern,15x8 with 4.5 bs. The wheels have 275 hoosiers installed. The tires are very, very well used. I put them on to check clearance. The wheels are like new and been on the car once with 2 passes. Tires still work well. 450.00 plus...

Check out my ad in the parts for sale. I have a nice set of wheels and used drag radials from my GN i rather not ship. Thanks

Here are some updated pics with the new dual 4 in DP, fender exhausts and new turbo. I still have to replace or repair the front bumper. Pictures by 9secv6 - Photobucket The car has been done for a bit but fuel pump problems kept it down the past few months.

325/50 15 MT Drag Radials. New , Just mounted on the car and off again. Can bring to Reynolds. 275.00 FIRM ... Fastgn@hotmail.com

I have two sets of MT DRs for sale. Can bring to Old Town. 325/50 -15 basically brand new. Mounted and drove car up and down drive way. 275.00 295/65 MT DRs. About 8 passes. One has a small groove on the thread caused by my fender trim coming loose. No damage to side walls or tire. 200.00

In order to repackage my turbo system and loose some weight off the nose of my GN, I have began some serious chassis mods. I have removed the frame rails in front of the motor in order to replace it with a cm loop. I have also removed the radiator,fan, hoses, core support , water pump, turbo...

Used-2 row, crossflow core aluminum radiator. This radiator was used in my GN in order to facilitate a forward facing turbo install. The Rad has -16 inlet and outlets plus a -8 on the lower side tank to run lines into a purge tank. It has no provision for filling. It was designed to be used in a...

Gbody parts tubular upper A arms.Complete with ball joints. These have less than a few thousand miles on them. Powder coated and in good shape. One ball joint needs a rubber boot replacement. Should be less than 8.00 at the autoparts store. 130.00 shipped cont. US. TRZ rear upper...

Since Cal hasnt posted it yet .. I will PT6466 Conservative HP rating ...800 hp:eek:

TRZ adjustable uppers. Used. Control arms have been notched for clearance when using a Ford 9 in. but will work prefect in stock set ups. Fresh Spherical rod ends. TRZ Spherical housing bearings.Used. Package deal...225.00 plus shipping