I pulled the cluster and cleaned the socket/connectors and the brake light in the dash works now. It does not come on with initial key on but does come on with the parking brake applied. Must have been loose or dirty connection. Thanks for the help.
OK, thanks - my bulb must be burnt out as it does not come on in the bulb test position - I will look into this more Park Brake Switch (Emergency Brake)
Does the dash "BRAKE" light come on with initial key on for 10 seconds or so? My brake dash light does not come on with the parking brake - could also be the switch on the parking brake, I know - just want to know if the dash lights are working before I get started.
My oil pan was leaking on the crossover pipe, check that as well. If your engine is dirty, it might help to degrease it before you add in the dye but as was said before, the dye will show the leak quickly
Thanks for the replies - I will have to figure out a way to support the passenger door without support from the hinge like in the video above. I was doing one pin at a time.
Maybe this...
Hello All,
Is there a way to replace the door hinge bushings without removing the hinge from the car or the door? The thread that Richard Clark posted in said that you can but I do not see how.
I did the driver's side last week I cut the pin but had to unbolt the hinge from the door. and it...
Yes, prime the pump, mine loses prime over the winter storage. Prime it, crank the motor over by hand to get oil to all bearing surfaces. Run for a few minutes and change the oil.
Sent from my XT1254 using Tapatalk