Search results

My starter quit the other day, with ignition on I could hear the fuel pump working, instument lights were on but when I turned the key to start no click from the starter but the instrument and radio lights faded out. After trying a couple of times I could feel the fusibel links from the solenoid...

I just found out that I need an intake valve. It is larger than stock , 1,771" or 45 mm with 0,3407 stem dia. and 4,713 OAL Google was not my friend this time.... Anyone who knows where to buy one ?

I have a pair of ported iron heads that are marked : PE ESP35. NY Sounds familiar ?

Will a Chevy ministarter for 153 tooth flywheel fit on my TB ?

My powermaster quit the Other day, I thought it was the pressure switch. But when I opened the lid the bottom of the container was full of some brownish slime. I replaced the brake fluid 3 weeks ago , I used 2 litres of brake fluid to make sure all of the old fluid was replaced. I bought some...

Summer at last , testdrive in hot stop and go traffic . Tempgauge steady at 160, used to hit 200+. Steve V had a video on Youtube showing a radiator he ordered from Rock Auto,seemed like a low cost solution for my overheating problem. Installation was easy, had to modify the rubber cushions...

I`m rebuilding the front suspension on my -86 GN , just to be sure ... Square end down , tangential end up ?

I bought a Scanmaster G that I could not connect to my phone, sent an e-mail to Bob Bailey who replied at once. I sent him the info he needed and he sent me a file for the Androidapp. A younger member of my family helped me install it and problem solved. !! Thank you Bob for exellent customer...

I found a Kenne-Bell 70 mm throttle body for sale locally. Would they work on a mostly stock engine? Would I loose throttle response / longer spool up time ? I`m also putting together a motor for E85 , stock block,ported irons,flat tappet 208 cam,80 lbs injectors. maybe it could be usefull on...

Hello ! Whats the diameter of the pistons in the Blazer caliper ?

What are the benefits of installing longer upper balljoints in stock upper control arms ? I bought new Mevotech ball joints from Summit but the taper is wrong , the nut only goes halfway down,no way I can install the cotter pin. The Mevotechs might work as longer ones but I sure like to have the...

I recently bought a "crate engine" from a -86 GN. Actually it came in several boxes,;) the block is said to be bored and honed with a torque block. The bores look OK , I plan to lightly hone them and replace the rings on the Speed Pro forged pistons. Whats the proper ring gap for the rings ? The...