Search results

  1. I

    I think I did something wrong...

    Installed RF components in the door and dash, RF in the rear deck. Sounds terrible, the staging is terrible. The backs sound strong, the fronts sound like am radio until i mover the fader from center to the fronts a little bit then the backs are pretty much gone. I used a Metra harness for the...
  2. I

    Fastener question

    I took the top of the dash off to replace the speakers and managed to lose all the little bolts that hold the dash top on. ANyone know the size and color so I can get new ones? Thanks!
  3. I

    Fiberglass parts

    Ok, I've read wayyy too much on the subject and have no managed to clog my brain so bad it's pathetic. Ok, so here is the situation. I have RF components I hijacked from another project to put in the GN. Here is the basic question: Can I just plug the tweeters in where the dash speakers were and...
  4. I

    Valve cover breather

    I can't believe I cannot remember this. Passenger side valve cover breather no problem. What I don't remember is with stock valve covers, what do you do to the driver side? for some reason I seem to remember another breather to replace the stock thing or block it off? Anyone?
  5. I

    Trim paint questions

    Getting my bumpers and fillers painted this weekend and painter asks two questions: 1. Front bumper marker light bezels; same color as bumper or flatter black like the headlight bezels? 2. Fender trim - mine are have patina but can be saved. Same question - flatter black or body color? And to...
  6. I

    Diagram of cowl/wiper/air inlet for heat/ac, wiper park plastic things etc.

    I've looked far and wide for a picture showing all of the cowl/windshield area so I can start my quest for parts. Many moons ago I removed all the hardware from the lower windshield area and removed the factory airbox. After several moves the hardware got lost and now I'm trying to put the car...
  7. I

    Would like some help from Canadian member finding/shipping something special

    Hello! I am in need of some help from a northern neighbor. My dad has been trying for months to find a liquor store here in the US that can get Alberta Springs rye whiskey. Would someone be willing to ship some to me? I will front the money all the way. I thought this would make a nice surprise...
  8. I

    Help with cowl assembly

    Does anyone have a diagram showing all the parts for the cowl/wiper assembly? I need to locate all the parts from the wiper arms to the screen grill that covers the airbox and a diagram o how it all goes together. So far I have not been able to find anything on Google. Anyone? Thanks!
  9. I

    RIP Kenny Holm

    I received a call a little while ago that Buick lover and former parts supplier Kenny Holm passed away from cancer. Kenny owned a radiator shop in Des Moines, IA and his Buick thing was to take the stock radiator and turn it into a three core. And if I remember correctly, he was one of the first...
  10. I

    Stock front swaybar mounting

    Can someone tell me or post a pic of a front swaybar installed? For the life on me I can’t remember which way it goes. Thanks! Sent from my iPhone using Tapatalk
  11. I

    E85 chips?

    Finally got my engine back in the car, and since I have an e85 pump just down the street, I'm gonna try it. I did a search and either I suck at searches (high probability) or I used the wrong keywords. Anyway, who can cut me a chip for MSD 50's? And, is there a chart or spreadsheet somewhere...
  12. I

    After 5 year hiatus....back together and no start

    So after a five year hiatus, I finally got my GN back together. I went from a nicely built engine with SFI FAST to selling that to fund a stage project that got aborted 2 years ago, to just saying the hell with it and putting a nice stocker back in it to drive. So, today I got it all buttoned...
  13. I

    Front/Rear Baer racing brakes for sale

    I have front and rear setup for a GN from Baer for sale. It is the G body track system that I upgraded with drilled, slotted, zinc coated, 2 piece rotors. The calipers are 2 piston and the spindle is a belltech 2" drop. The rears are 12" single piston 2 piece rotors and have the emergency brake...
  14. I

    18" Simmons Type F wheels for sale

    I have a set of these bad boys sitting in my garage. Never mounted to a car, with tires, balanced with locking lug nuts as well. 18x9.5 and 18x10 245/40/18 fronts and 285/35/18 rears Sumitomo HTR II tires. $2600 plus shipping. The wheel pictured is the only one I opened, and that was just to...
  15. I

    18" Simmons Type F for sale

    I have a set of these bad boys sitting in my garage. Never mounted to a car, with tires, balanced with locking lug nuts as well. 18x9.5 and 18x10 245/40/18 fronts and 285/35/18 rears Sumitomo HTR II tires. $2600 plus shipping. The wheel pictured is the only one I opened, and that was just to...
  16. I

    Front and rear Baer Brake setup for sale

    I have front and rear setup for a GN from Baer for sale. It is the G body track system that I upgraded with drilled, slotted, zinc coated, 2 piece rotors. The calipers are 2 piston and the spindle is a belltech 2" drop. The rears are 12" single piston 2 piece rotors and have the emergency brake...
  17. I

    DeQuick Fuel Tank F/S

    This is a blast from the past. Tony DeQuick started making these and then stopped. Only a few were ever actually built and sold. I have one. I want it gone. Fits in the stock location uses the stock filler neck, and you have a nice sumped tank with bungs for feed and return lines. Made of...
  18. I

    Please help locate missing 18yo female

    Be on the lookout for an 18yo female abducted from the Target parking lot in Overland Park KS on Saturday at 7:10 pm by an unknown male subject. This made the national news tonight. She is described as a 18 yo white female, 5'6" 120lbs brown hair brown eyes. Last seen wearing pink tank top...
  19. I

    Need bolt sizes

    Long story short, I let my 8 yr old help me clean the garage. He thought he would help by cleaning off my bench where I have bbeen working and tossed the baggie that had all the valve cover bolts and doghouse bolts. So, to save myself some hassle, can anyone tell me the sizes of the doghouse...
  20. I

    Fuel lines

    I want to run braided from the stock feed and return, mostly because I can't find my stock lines. What is the best way to do this? I already have the fitting from PTE for the fuel rail, I guess I need to know what size the fitting coming out of the FPR is and the ends where the lines come out at...
Top