Search results

Well i have a 1985 wh1 type originally I got it with the original 3.8 non Ic engine soon after I converted over to enter cool I picked everything up out of an 86 mine is the transmission I'm still running the 85 transmission well the tranny went out I have a blown head gasket as well and I'm at...

well i been running rich since i got this car running everything is stock other than the adj fuel pre reg my readings on powerlogger at normal tEmp at idle are ecm 13.8:1 maf 12.7 G/C LV8 44 G/C TPS 0.42 RPM 750 IAC 34cts MAP 22.76 kpa coolant 186.6 intake air 82.6 volts 13.8 o2 0.670 x-counts...

Well i been wanting to do the switch but now arizona only has flexfuel/e54 is there anyone here running the new gas an has noticed any diff in power change ?

Im looking for a good working ecm

I'm looking for a vacuum block with an extra port for the booster I had another post before but the guy never got back to me?

Im looking for a SD chip im switching to speed density

I looking for a good source or place to buy a new MAF ?

Im looking for a complete plx wideband setup

Well im thinking of converting to speed density my question is what items do i have to buy? I already have 3bar map Powerlogger

Well i did a coversion on my 85 a while back an since i did tje swap motor the car runs good but i keep geting knock under boost ived done the following Injectors Plugs gaped at 35 Wires Coil Control module Ive tried 3 diff chips 2 set of injectors Adj regulator An i only get knock under...

Im lookjng for the vacuum block to work with booster conversion

Is there anyone running nitto nt555r 275/60-15 on a 15x10 prostar? Or what option would you guys recommend???

I just want to say HAPPY 4TH OF JULY WEEKEN to all be safe

Im looking for a new or semi used working adj fuel pressure reg

Im looking for a powerlogger ..

Well i just finished converting my tr to intercooler setup from a 87gn but i have a question on the wastegate solenoid i dont have one can i just run a vacuum line fom my turbo to my adjustable wastegate ??

Im at the point of just burning this car down lol Well i have no spark here are the things ived tried 3 crank sensors 3 ignition modules 2 ecms 2 ecm chips 2 camsensors Replaced coolant temp sensor Checked voltage on all the pins Continuity test on every wire to all those sensors New fuel & fuel...

Well I gone through the no start tree and so far evey test passed ... So far I've tested Crank sensor Cam sensor Fuel pressure Spark An they tested ok but the one is when I'm testing cam sensor and crank sensor voltage b to c I'm at 5.27v the chart its telling me it should be 6-9v I also...

Well let me start by introducing my self my name ia favian an I currently own a 1985 Buick T type that I converted over to intercooled well long story short everything is connected an ready to run but I'm having the small problem of no injector pulse the car wants to Fire up only with ether I...

I been looking online an the only part number i see is ( ATP Y-369 ) has anyone had any experience or do you guys know where to get one that's like OEM foe the gas pedal cable ??