Search results

I went with a fast. So now I have a good working ecm and powerlogger, sd2 with cable and board turbotweak chip. And a scan master with the sd2 chip. Ran for 3 years fine. Asking 600 for all. If interested please contact me. Cant upload pictures because they are too large. Contact me for pics

So I have been wonder this for a while. I have a sd2 chip with a aem 3.5 bar. I have my configuration set to 3.5. Today I jumped in the car turned the key on and my boost was -5.0 4.9 on power logger. I know there is a little difference from altitude I am 5280 Above sea level. Should it be 0...

So I need to sell some of my hot air stuff. If anyone needs engine parts like intake x2 $60 Pair of heads have new head gaskets $100 Front cover for 14 bolt pan$ 50 Oil pan 14 bolt $40 Engine harness hotair $100 headers 2x pairs $50 a pair one ebay pair that's modified with v-bands and will fit...

I found a few threads about how some people have done the hydro boost on the intercooled cars. But does someone have a drawing of how to do it. My 84 has the hydraboost already but I'm swapping to the serp belt. just need to know what likes I need to run to the high pressure side and the low...

Looking for more converter before i install my 6776 and wanted to see if anyone on the board had a converter laying they would want to get rid of. If so please let me know.

So recently my clacking has become more pronounced and honestly it's pissing me off. It sounds like there is one louder then the other on the passanger side. I have read a few posts on here. Is there any way to get around this. I am still running the stock stamped rockers so I know I will get...

So recently my clacking has become more pronounced and honestly it's pissing me off. It sounds like there is one louder then the other on the passanger side. I have read a few posts on here. Is there any way to get around this. I am still running the stock stamped rockers so I know I will get...

So I recently bought a set of kenne bell rockers off a member on here. But the company that shipped them didn't give to shits about what was in there and threw them around. Well long story short broke two of the adjuster screws. Has anyone ever drilled out the 3/8 adjuster and tapped in for...

So I am looking to see if anyone has a 86 87 accessory bracket they are wanting to sell. I am trying to get my alternator over to the driver side so I can install my 87 headers so I can don't have to have my turbo right on my intake.

So I recently got a turbonetics t76 from my buddy. The turbo only has 100+ miles on it. Was on a 2g dsm but was way to much turbo for it. I picked it up for 200 bucks so I couldn't pass it up only down fall its journal. Why turbonetics though it was a good idea to make that big of a turbo...

Does anyone have a spare rocker set up laying around that they would be interested in selling. I would buy new but at the moment my build set me back. I am still running iron heads.

So about 3 months ago I converted my hotair to a intercooled set up with the 87 intake manifold and all that fun stuff. I have a set of 87 headers that a buddy gave to me need fixed but that's simple. My question is has anyone done this with the stock 84 accessories and alternator location. Or...

I was told to post in this section as i posted in the general not thinking. But I am looking for the throttle linkage on the throttle body and the bracket that the throttle cable and the TV cable clip into. I know that g body has the bracket but I don't want to spend 100 bucks on it if i can get...

Does anybody have the factory linkage on the throttle body and bracket for the two cables throttle and tv For 86 87 . Maybe wants to sell them. Please let me know they are the last things I need to get my hot air conversion done. Matt

Hey everyone. I am going to swap over from my H/A intake manifold to my intercooled manifold. Does anyone know where i can get a throttle cable. I seen some people say the lokar ones. Also i need the linkage that hold the cables and the linkage that bolts on the throttle body. Any help would be...

So I just got done building my bottom end with the long rod stroker and I moved onto my heads. I disassembled them cleaned them did all that good fun stuff. But when I installed the beehives i didn't use the stock shim. Do I have to put the stock bucket shim back in or will I be ok. This has...

So I recently bought a upper plenum and tb. But the guy I got it from didn't give me the throttle linkage that the tv and throttle cable clip onto. Is there a place were I can but these or if anyone has one.

So I have spare engine that I am wanting to build before summer. It is a 140 20 bolt block. I have read that 140 is a slightly taller deck and will cause my compression to be lower but if this works i can always deck the block and heads. I am having a hard time finding anything that says its...

Looking for a lower intake manifold for 86 87. I have looked around in eBay and there's only one that I would be interested in. If your in Colorado even better me to. Lol if you do pm me please. Matt

So I looked around on the main page and couldn't find a place to ask this. So I figure I would ask in the general section. I am looking for 86 87 lower intake manifold. I live in Colorado if anyone local has one I have looked on ebay and all that but there is only one I would be interested in...