Search results

  1. Cape Cod GN

    Question on T-roof body seals

    Hi I’m trying to find t-roof body/ window seals for the upper door sills.(Roofrail seal) I have replaced the t-roof seal that the windows roll up to. I’m looking for the two on either side. I’m only seeing the hard top seals. Anyone know of a link or part number and the best deals available...
  2. Cape Cod GN

    Dakota Digital VSS Tach issue

    thanks. I have a 200amp Power Bastards alternator. I’m wondering if it’s causing the issue until the current overflow cable sends the extra juice back to the battery.
  3. Cape Cod GN

    Dakota Digital VSS Tach issue

    Hi all I wired in a Dakota Digital Dash for the GN. All works great but having an issue with the Tach. When I do a cold start the Tach bounces and will also just cut out completely. Then start again intermittently and keep bouncing then cut out. Then when the car warms up the Tach works fine. I...
  4. Cape Cod GN

    Error codes 15, 21 and 23

    I’ll take a look at the coolant sensor as well. Thanks for the input Pronto.
  5. Cape Cod GN

    Error codes 15, 21 and 23

    Wow! Excellent! Thank you again.
  6. Cape Cod GN

    Error codes 15, 21 and 23

    That’s gotta be it. Thank you Savage V6 for getting those schematics for me.
  7. Cape Cod GN

    Error codes 15, 21 and 23

    Savage V6, FYI I drove it twice during hi SavageV6. FYI, this happened twice when I was driving through a heat wave. It was around 95-100 degrees. So I’m thinking it’s a connection that’s being affected in the engine compartment. Do you know which plug on the wiring harness has TPS sensor, air...
  8. Cape Cod GN

    Error codes 15, 21 and 23

    I’ll check that. Thanks SalvageV6.
  9. Cape Cod GN

    Error codes 15, 21 and 23

    Hello all, driving around today and my CEL came on. My scan master G read off codes 15, 21 and 23. The car started missing and running rough as well as the rpm went up to 1500rpm at idle. Additionally the scan master G had a reading of negative 30 degrees coolant and negative 70 for air temp. My...
  10. Cape Cod GN

    Knock gauge question

    Thanks Dynoman. Should it show any of the green lights when I’m in WOT to show that there is no knock or should it read no lights at all unless there is knock? I was under the impression that it should read green/ yellow on the tree for no knock and red if it gets knock.
  11. Cape Cod GN

    Knock gauge question

    Good day everyone. I just installed a Casper’s Knock Gauge. I get the green center light and that’s it. No other lights light up when I’m driving or in WOT. Is this normal? Should it at least be giving me a reading during WOT or only if there is knock data going to the ECM? I followed the...
  12. Cape Cod GN

    Car makes boost but it's really slow.

    13xTurbo did you ever resolve this? Sounded like a Cam Sensor with the studdering.
  13. Cape Cod GN

    Bad Gas causing ping?

    Hi Thanks, yes I added more alky. I was between 6-7 on the dial and bumped up to 7-8. Still did it. Do you know If that octane boost stuff works? I have a full tank...lol.
  14. Cape Cod GN

    Bad Gas causing ping?

    Hi all I’m just looking to see if bad fuel can cause a pinging at WOT? I have Meth injection (working I primed before the test). 43psi fuel and pushing 20 lbs of boost outside temp was about 52 degrees. I fueled up a couple weeks ago at a side rd gas station. So I’m thinking it might be the...
  15. Cape Cod GN

    87 GN intermittently “skipping””

    That’s what it was. I bought a new Cam Sensor. The Cam Sensor cap was cracked. Thank you all!
  16. Cape Cod GN

    87 GN intermittently “skipping””

    Yes sir. yes sir.
  17. Cape Cod GN

    87 GN intermittently “skipping””

    Not many mods: Alky, Lucas 42 pounders, Walbros 350 pump, precision 61/61 turbo. Also have rail fuel pressure gauge.
  18. Cape Cod GN

    87 GN intermittently “skipping””

    Thx for that info TexasT.
  19. Cape Cod GN

    87 GN intermittently “skipping””

    John I’m using the LT1 with MAF translator.
Top