Search results

  1. G

    Carb info for the turbo design.

    since the old pictures are gone, here's my modest contribution: on the picture, the left carburator is a NA quadrajet version; the right one is a non-CCC turbo version, the red arrow points to the extra port mentioned in this thread. A CCC turbo quadrajet will not have the extra port, but the...
  2. G

    Engine wiring harness - CCC 3.8

    I'm good, thanks! Found one item that's close enough to what I need.
  3. G

    Engine wiring harness - CCC 3.8

    sounds like what I need. I'll PM you.
  4. G

    Non-A/C alternator bracket, A.I.R. bracket

    the setup looks complicated... :)
  5. G

    Non-A/C alternator bracket, A.I.R. bracket

    Swapping my 3.8, will re-use the PS pump bracket, but will need 1) an A.I.R. pump and 2) non-A/C alternator brackets. Would be interested also in 3) any A.I.R. stuff also that you have laying around - solenoids, tubes, pump, etc. Old: New:
  6. G

    Engine wiring harness - CCC 3.8

    Ok, not sure what the 84-87 ECUs look like compared to a 83. On the image below is similar to what I need - connectors #2/3 are those for the ECU, #1 is the interconnect to the dash.
  7. G

    Engine wiring harness - CCC 3.8

    @N2BUICK looking for a carburated wiring harness, so as close to 1983 as possible - all dressed with connectors for the MC solenoid, TPS, ESC, A.I.R. stuff, EGR valves...
  8. G

    Engine wiring harness - CCC 3.8

    @precizion818 thanks! still looking :) I have an 1981 harness, but it`s not complete for my 1984 setup.
  9. G

    Engine wiring harness - CCC 3.8

    gbody engine wiring harness for a CCC carburated engine, preferably a 3.8, preferably a carbed turbo (I can dream...) but open to other stuff - 305, 307. The more wires you have, the better it is
  10. G

    ECM or PROM for 81-83 Turbo Regal - carburated

    Ok thanks guys, I found me the ECMs I need here :)
  11. G

    Big parts list

    will send you a DM for details
  12. G

    Big parts list

    I checked and it would indeed fit
  13. G

    Big parts list

    Is the harmonic balancer still available? Which engine/year is this for, looking for a non-EFI balancer (1980-ish 231 Turbo)
  14. G

    ECM or PROM for 81-83 Turbo Regal - carburated

    Thanks @BobbyBuick ! After 83, that would be for an EFI engine, which does not fit may application.
  15. G

    ECM or PROM for 81-83 Turbo Regal - carburated

    Indeed, I checked car-part.com, lots of potential - we would need to know what PROMs these three-letter-acronyms on these Riviera ECMs refer to. At least that's an indication, others will just list the ECM part no which is useless unless you already have the PROM you need. I have a 1982-88 Buick...
  16. G

    ECM or PROM for 81-83 Turbo Regal - carburated

    Checked all these listings, PROMs not included with reman, used ones have unknown PROMs or for other engines. GM did not do their best move by not making the ECM/PROM combo a unique part number. But I got someone here who had a couple of turbo carb ECMs, including a 4770 for a turbo car with...
  17. G

    FS: Chip Hackers - Step Inside - CLEANING THE SHELVES pt. 2

    I guess this is long gone by now :) In particular: these are of interest to me: PN 1224770 and 1226519
  18. G

    ECM or PROM for 81-83 Turbo Regal - carburated

    Several parts would work between 1981 and 1983. Waiting for some documentation for 1982 and 1983. For 1981, this is what I see (Monte Carlo wiuth 231-3 turbo engin, assuming other "A" body will be similar): ECM is 1224770 or 1224810 ( I see the two listed) PROMS are 5974DR or 5691HP...
  19. G

    ECM or PROM for 81-83 Turbo Regal - carburated

    Looking for the PROM (or ECM with PROM) for a 1981-1983 Turbo Regal - carburated. Preferably a 1983, but will settle for 1981/82. Gilles
  20. G

    Buick V-6, oddfire, turbo and TBI

    oil pump is a-pumpin' as it should. low drill speed to run the pump means pressure is not 100% of expected pressure.
Top