Search results

  1. H

    TV cable

    Looking for an original tv cable in good condition. 87 gn. Please post pics and price. Thanks.
  2. H

    Extreme chip with axis. Rich at wot

    Basic combo stock engine te44 and alky. Lt1 maf, axis translator, swapped in the extender extreme chip today and while driving blm varies from 109-146, at idle it's 130-135. Wideband stays close to 14.7. But as soon as I get into the throttle wideband below 9.0. I've triple checked translator...
  3. H

    WTB - Tornado KI-75, 3 inch diameter.

    Does anyone have one of these theyd be willing to sell? I cant seem to fnd one available online. Trying to fix the te44 part throttle surge.
  4. H

    28 or 30 spline axles?

    Planning some rear end upgrades. Car is currently mid 11s. Goal is eventually mid 10s. Rear is stock g80 34k miles with no issues. Should i upgrade to 30 spline axles and new eaton posi or just upgrade to new 28 spline axles and add a girdle? Is it worth the expense to upgrade to 30 spline at...
  5. H

    Angled IAC housing

    Looking for an angled IAC housing before I buy new. Let me know what you have.
  6. H

    1/8 mile pass from Sunday

    First time out on this combo since mostly stock. Only made one pass with a light launch but new mickeys hooked great.
  7. H

    When to upgrade?

    I assume I'm now on borrowed time with my stock brf trans. Car went 7.3 @ 93 in the 1/8 mile. 34k miles, current mods are ck shift kit, hughes deep pan, aux cooler, husek 3021 hf converter. Still operates perfectly but i should probably go easy on it until i can get a solid build. Any thoughts?
  8. H

    Is this an atr rear sway bar? Loose fit. Help appreciated.

    Just installed this bar. Needed a lot of shims. If not atr what is it and correct application?
  9. H

    How many guys with RPO ZR6 "zone office show car"

    Can't find much info on this. Some really old threads. How common is this?
  10. H

    ATR rear sway bar wanted

    Looking for an atr rear sway bar. PayPal ready.
  11. H

    Base spark setting with axis and alky

    I have the axis controller and axis chip. Just added alky so I want to correctly dial up the spark settings. I have HIGH (wot) set for 20.5 to be safe. The next step up would be almost 22. But the LOW setting (in vacuum but not at idle), My thought is to set this at 23 like low gear timing would...
  12. H

    alky install with tps harness. What is everyone doing about the factory boost gauge?

    Installing my alky kit, noticed the new tps harness is plug and play and the green wire goes directly to the pac controller. This leaves the factory map sensor harness unplugged, so in order to keep the digital boost gauge working I would have to splice the old green wire to the new green wire...
  13. H

    powder coated T wheels - need polishing help

    Just purchased these. They've been powder coated and look nice but if I wanted to polish the inner and outer rim and the fins would the pc have to be blasted off first?
  14. H

    favorite turbo for stock heads and cam?

    So tax time is coming and I'm thinking about shopping for a turbo soon for my blue car. Thought about having the Garrett housing machined for this freebie 58mm turbo I have but now I've been looking at the ta6262 for stock appearance. Possibly even upgrade to ball bearing. Or maybe order...
  15. H

    converter combo help ptc 3200 10 inch

    I'm concerned this converter may not work properly with my combo. I currently have the 10 inch ptc 3200 lockup. Basic mods are TE44, stretch slic, TA DP, stock engine with supporting mods, LT1 maf and axis translator. When I installed the te44 spool up was very slow in first gear. With this...
  16. H

    shimming 700r4 tcc solenoid for 2004r. need help.

    I have a new solenoid for a 700 and the instructions say to shim .100 washers that it says are included. It came with a pair of studs and a pair of nuts. Do I use these? I assume the shims are missing?
  17. H

    stalled then restarted fine....

    Driving home from a car show tonight, about a 30 minute drive, I pulled up to a friends house and the car abruptly stalled at about 5-10 mph. Restarted just fine. All data on scan master looks normal. I drove home, another 10 minute drive and it ran fine and didn't stall again. What experiences...
  18. H

    help me identify this turbo.

    Both compressor and turbine wheels measure 58mm. What do you guys think?
  19. H

    Junk buick sighting. Possible wh1?

    Sorry for the bad pic but this was as close as I could get to the car. Any thoughts?
  20. H

    Racetronix, Please check my order status!

    Please check on order # 117681 . I have not yet received this order and I never received tracking info. I received an email on May 14th stating that my order had shipped but I did not receive a second email with tracking information. I replied to the original email I received from you a few...
Top