Search results

  1. B

    Turbo and ECU

    Pm sent for ecu.
  2. B

    Accel Gen 7 Buick V6 Complete PnP $375

    Still available?
  3. B

    Transmission converter inspection cover

    I'll take one if it's for the 200. You take PayPal?
  4. B

    Alky kit, turbonetics turbo, ptc, Kenne bell

    Can you sell the alky kit without map sensor? Lmk thanks.
  5. B

    PT61, Alradco radiator, Heater hard lines

    Interested in the turbo. What exhaust housing? Any pics?
  6. B

    Translator

    I have a basic translator v 6.25 for 160. 85mm maf with pigtail adaptor for 75.
  7. B

    Cuts out under boost, logs attached

    Found the problem, opened up the convolute on the maf pigtail. While monitoring the signal, reference, and ground with dso on peak detect, I found that twisting and pulling on the ground wire underneath the alternator would cause voltages to drop, losing ground. Posted from the...
  8. B

    Cuts out under boost, logs attached

    Makes sense. When the weather clears up, I'll stick a stock maf on. Would a bad maf spike up? I usually see bad mafs have a low (voltage) or drop outs in the signal. Possible bad calibration (settings) in the maf translator or possibly bad translator? Thanks again guys. Really appreciate...
  9. B

    Cuts out under boost, logs attached

    RmvBfrFlght, I meant to comment on the maf earlier but works getting real busy. I did notice that the signal shot straight to 256g/s. Is that not a good thing? For some reason i thought it was ok. Do you have any logs of a good signal? Thanks again.
  10. B

    Cuts out under boost, logs attached

    Translator switches On On On Off. Base set at 8, WOT at E. I will check it out when I get a chance. As for the o2, during the whole 15 minute drive, it never cycled, closed loop or during pe always above 750mv-850mv. I did notice the idc reach 100%, which does not make sense as o2 was...
  11. B

    Cuts out under boost, logs attached

    Bump Posted from the TurboBuick.Com mobile app
  12. B

    Cuts out under boost, logs attached

    Having a problem with boost cutting out under load. Feels like it stalls under a heavy load, loses all boost, but right after I let go of the accelerator rpms come back up. Mods are in my signature. Fuel pressure rises with boost and steady. Turbo is set tuner style at 10 psi (no map signal...
  13. B

    Stock Turbo

    How much total shipped to 94523? Posted from the TurboBuick.Com mobile app
  14. B

    Help with rotating rattle noise coming from trans, bouncing pressures VIDEO

    Hi all, Went to go for my Saturday morning drive and heard an awful rotating/rattling noise coming from the converter/ pump area on startup. Car was previously driven about a week ago and had steady pressures, 100 psi min and would go 260-280 full tv. Tv cable is adjusted properly as i had no...
  15. B

    Power logger with modded ECM

    PayPal sent. Thanks Posted from the TurboBuick.Com mobile app
  16. B

    Power logger with modded ECM

    I just read modded, does that mean modified for low z injectors? Posted from the TurboBuick.Com mobile app
  17. B

    Power logger with modded ECM

    I'm sorry, I meant the upgrade chip for the scanmaster 2.1 that comes with the powerlogger when purchased through fullthrottlespeed.com. Posted from the TurboBuick.Com mobile app
  18. B

    Power logger with modded ECM

    Do you have the scanmaster 2.2 upgrade also? Interested Posted from the TurboBuick.Com mobile app
  19. B

    Translator install with 3"lt1 maf code 34

    Maf is questionable. Wiring has been triple checked. The seller has shipped me his own personal maf that is on his car and is verified good. Will let you guys know what happens when it arrives. Thanks everyone.
  20. B

    Translator install with 3"lt1 maf code 34

    Was wondering if anyone can help me out. I installed an lt1 maf/translator I bought from someone on the board today to see if it will clear up some driveability issues and a code 34 comes up after 10 seconds of idling. Clear the code, plug the oe maf, code goes away. Plug translator back in...
Top