Search results

  1. S

    ATR Headers and crossover pipe for sale $250.00 plus shipping

    For sale ATR Headers and crossover pipe , includes original v-band clamps and band clamp for crossover pipe. $250.00 plus shipping.
  2. S

    Pressure dropping while monitoring alky pressure

    I ha ve an ALKY system and I've been logging my alky pressure for a few months now and on the last 3 times out the psi on the PL are only reading around 90 - 105 lbs at WOT, before when i first hooked up sending unit it read 150 lbs at wot.I don't see any leaks at pump or on line when i push...
  3. S

    low fuel pressure when started and running

    My car started having low fuel pressure while i was out running it. At first under boost i started getting kn, then i noticed FP didn't go up as much as boost did. i mean pound for pound. Volts to pump when running are 14.0, I had another pump around so i decided to change it but no luck. I...
  4. S

    Boost too high on Tial 38 wastage

    I have a Tial 38 mm wastage and usually run around 33-34#, but now it seems to peg out my boost gage on my PL at 36.1. without changing anything What would cause this. I have a bleeder type controller attached to it.
  5. S

    exhaust housings on te45a turbo

    I have an te45a turbo with a precision exhaust housing and i read on another post to have the exhaust housing changed over to a garrett housing to increase spool up and little more power. Is the housing just changed or are the blades changed also and the whole turbo needs to be sent out i...
  6. S

    ZMAX concord nc has streetcar takeover this weekend 6/24-6/25

    This weekend anyone interested at Zmax dragway there is streetcar takeover and Dyno testing. They have all the times and schedules starting on Friday night and all day Saturday on streetcar takeover Concord North Carolina, thanks
  7. S

    2 nozzle alky or single nozzle

    When do you go to a 2 nozzle alky spray from a single nozzle, does the duel nozzle cool the air more on hotter days, if running high boost levels is a 2 nozzle better any opinions or knowledge will be helpful, and how hard to add another nozzle on if needed thanks.
  8. S

    BLM is high at idle on power logger

    It seems that my blm on power logger screen is up to 142 at idle, this is on the screen where you can change the parameters, it is the top square on right of the two the other one is INT at 128,fuel press is at 40lb with hose off at idle.When i get it to 1500 rpms it drops to 128, it use to be...
  9. S

    Which turbo blanket to get and how do they work keeping heat down

    I am thinking of getting a turbo blanket from weber, my turbo is an old school Te45a, any one know if their T4 that they sell will fit and will it keep heat down allitle underhood, now i only stock cover on it. let me know any pros and cons also, thanks
  10. S

    stock drive shaft off 86 gn

    Anyone interested in driveshaft off my 86 gn ,I replaced both solid universals a few years ago, just sanded and painted. 75.00 plus shipping
  11. S

    60 # TT injectors and matching TT 60lb chip for alky

    I have a set of 60 # inj and chip , both from TT for sale. The chip is for alky inj and the injectors have about 5000 mi. on them. 225.00 plus shipping, paypal prefered.
  12. S

    tial f38 wastage which downpipe will it fit ?

    I recently bought a TIAl f38 wastage and thought it would fit my old ATR down pipe but it turns out the screw holes are off by about 1/8 in. or so. If I make the holes longer to fit it looks like the valve will not cover the hole all the way. Any one use any other dp and from how did you buy it...
  13. S

    wastegate was reading 100% now reads 80% ?

    I have old ATR wastage and downpipes, the last couple of days out my wastage reading on scan master was reading 80.2% at 28-29 lb boost but before it was reading 97-100 % at 30-31 lb boost, any reason why this would drop? I would like to keep boost up in 30 lb range, Before i did tightened...
  14. S

    To switch to 80 # inj or stay with 60 # INJ ?

    I WAS WONDERING IF SWITCHING TO 80# INJ WOULD HAVE ANY INCREASE IN PERFORMANCE ON MY CAR, I HAVE 60 # INJ NOW AND CAR SEEMS TO BE RUNNING PRETTY GOOD. ACCORDING TO MY POWER LOGGER THE INJ ARE AT 72% , A/F OF 10.9 AND O2 IS .788. I'M RUNNING 30# BOOST AND FUEL PRESSURE SET AT 45# WITH HOSE OFF...
  15. S

    New best 1/8 time: 6.99 @99 mph

    Just went to mooresville nc 1/8 mi track, I was happy with times with champion ported iron heads and intake , trying to get to 100 mph in 1/8, hopefully get 1/4 times if zmax opens back up for test and tune. 60 ft - 1.57 6.99 @ 99.0 mph #30 lb boost 26* / 22* timing...
  16. S

    fuel pressure transducer

    Was wondering who sells fuel press. transducer besides casper?
  17. S

    lakewood 90/10 front shocks

    If I replace my front shocks with these lakewood 90/10 drag shocks is the ride height the same on the car as the height is with just the stock shocks in.
  18. S

    For sale RJC race motor brace

    for sale is an RJC motor brace I bought new and installed but never ran car with it on, Comes with bolts and directions easy to install also.Decided to go with new poly motor mount on drivers side old one was shot, price is 65.00 plus shipping. I'm having trouble sending pic with this will...
  19. S

    Shipping cost

    I was wondering how much it would be to ship the rear bumper filler for 86 gn to cornelius nc 28031, and cost of filler and how would like payment to be made . Thanks steve k 518-598-8810 if needed
  20. S

    Alky pump starting to leak

    My alky pump started to leak after car was parked. was wondering if it was ok to send pump back to alky shop and have them repair it. The leak is where the head and cylinder meet, system works great just needs to be fixed. thanks
Top