Search results

  1. 696

    2024 Rules Discussion....

    Instead of waiting til the end of the year or next year, might as well throw it out there. Get them set so people can have the most amount of time to update their car before next year. Any ideas or thoughts for 2024?
  2. 696

    Fuel pump question

    Looking to possibly do a lightweight steering column and would have to rewire the ignition and start switch. Anyone have a diagram of the steering column wiring harness to know which wires I'll need to use? Did a quick search but didn't find anything. Thanks!!
  3. 696

    EZ LS to XFI harness

    Anyone know of a harness (other than Hartline) that is out there? Holly said they only sell them as a complete kit and they are on indefinite back order due to manufacturers being out of parts. I can get my hands on everything expect the harness so I don't need the complete kit Hartline sells.
  4. 696

    Power to manual steering box issues

    So I pick up a manual steering box and reading from a lot of people on here it is was an easy 20 min swap...well, I get mine bolted up and the stock steering shaft is about 3-4" to short???? No one mentioned a steering shaft issue in any post, some a pitman arm. But mine is the S 10 7843962...
  5. 696

    Those with 3 1/2" front wheels, what's your backspacing?

    Wonder what you guys are using.
  6. 696

    Manual Steering Boxes, S-10 vs Factory Regal???

    Any real differences? Looking to convert my regal to manual steering and have found an S-10 and a Regal manual gear box. Wonder if either was better than the other.
  7. 696

    2015 THS Results from the GS Nationals

    We had 11 racers qualify, at the end qualifying it was as follows: 1: Sean Hayes- 9.60 - 139.82 2: David Day- 9.62- 137.23 3: Patrick Hester- 9.97- 135.91 4: Darrow Watts- 10.21- 131.51 5: James Bennett- 10.43- 128.62 6: Mike Schwab- 10.55- 126.35 7: Dave Barclay- 10.65- 126.20 8: Jason...
  8. 696

    Norwalk Roll call...

    Who all plans on being there? I'm throwing my name in the hat...
  9. 696

    Last day at the track for the year...# hunting.

    Figure with the cold weather setting in I'd offer up this video of my last track outing of 2014 just to have something to look at. After the GS Nationals Kip, Colin and I came home and did some tuning on the new combo. We figured there was a 10.xx in the set up but I wasn't able to get it at...
  10. 696

    Edash into Casper Harness???

    I'm installing the Edash into the Casper extension harness by the supplied instructions. The C30 & D5 ports are already being "used"? Are you supposed to unpin them and plug in the edash or will this damage the XFI? I did a quick check but the only thing I saw was the edash and scanmaster 3...
  11. 696

    Those with the G body tublar uppers...please take a look inside

    I have the g body uppers and lower in the pic below. I installed them without the engine in and when I lower the car back on the ground they were at the angle in the other pics. These ARE NOT my pics but Tricksixpa's however they sit the exact same way. Is this normal?? Stock ball joints, stock...
  12. 696

    Those that have the GBody Tubular Lower & Upper A-Arms....

    I would like to know how they have been working for you, any issues, how long you have had them, hints to help align if needed, ect.ect.. Looking to possible buy a set and just doing my research, not a lot out there but the few threads under the search seem to be positive.
  13. 696

    AEM Wideband, Rear End Cover, Heated O2, Adjustable FP Reg, ect, ect

    A few thing have I have to get rid of. Items are used unless listed as new. Pay-Pal, 3% extra. VDO EGT Gauge, missing sender: $35 shipped PENDING Autometer Elect Water Temp Gauge, missing sender: $30 shipped NEW Casper Heated O2 sensor: $50 shipped Adjustable Actuator: $45 shipped Adjustable...
  14. 696

    GN1 Performance 3 Inch Stainless Steel Cat Back Exhaust System W/ Test Pipe

    Going a different route so I won't need this, the system is used. Pay-Pal, 3% extra. GN1 Performance Dual 3" Stainless System. Banding clamp were used (and supplied) so everything slides together easily. You can fit, adjust and tighten with ease. Same exhaust as the link below. The GN1...
  15. 696

    E-30??

    Anyone played with E-30? I did a search and found nothing. Was wondering if it was comparable to 93 with a kick?
  16. 696

    Couple of vids from last summer...

    Getting kinda antsy to see the car running again. Figured I'd throw up these vids to help pass the time.
  17. 696

    Which line is the outout line on transmission?

    Looking to install a thermostat on my external tranny cooler and it says to put the thermostat on output line of the transmission (input of the cooler). This should allow the fan to come on when the fluid gets to 180. Is it the top line or the bottom?
  18. 696

    3" Driveshaft, Cold Air Kit, Cheetah Console

    A few thing I have to get rid of, most items are used (1 is REALLY used). Pay-Pal, 3% extra. 3" Alum driveshaft w/ BROKEN END (see pics). If your good with a welder you should be able to get into this cheap. $85 shipped SOLD Turbo Action Command Center: Fit Cheetah shifters and is new...
  19. 696

    Modified GN Wiring Harness, Light Weight Front Bumper Brackets

    A few thing have I have to get rid of, all items are used. Pay-Pal, 3% extra. Wiring Harness: Off of an 87 GN W/O Heat or Air. Was modified for a racier car but will work for the budget minded as well. This came off of a running/ driving car so if you are needing something to get yours running...
  20. 696

    Limited TE 60 Turbo

    Limited Engineering TE 60 turbo. Precision .63 Exhaust side. No play in shaft, still has paint markings on fins. Approx. 750 miles on it. $600 + shipping. Please add 3% for paypal
Top