Search results

  1. L

    1987 we4 north jersey

    so ive decided i wanna get out of these cars, it was my dream car and now i can never look back and say i wish i purchased one or get a built one already in the future, i dont have the time, or money anymore for this car anymore and im sure some one that knows more than i do can really make this...
  2. L

    low oil/choke light with girdle?

    i just saw the this light flash going around and uphill turn, it came on for like a second and went off, the first time i immediately pulled over and checked the oil and it was above the add line and i am using an rjc girdle with the pick up extension, oil pressure never missed a beat, im...
  3. L

    Problems finally solved!!!!

    So my false kr issue is 99% gone now, I put a used great condition posi with delco additive and u joints they we're shot the clutch packs were burnt to crap and the gears had soo much play, no more whining no more trans clunk, no more false kr, no more jerking around turns, I'm at 17lbs running...
  4. L

    Is my posi bad?

    When I turn the wheel like under 5 mph the wheels like jerk in the back, I replaced both u joints one was bad, when I pulled the cover all the gears were in tact but it looks like the driver side clutch material in the rear was burnt up, i can hold one wheel and spin the other forward with some...
  5. L

    wont get richer with adding mroe fuel

    my wideband reads 11-11.5 is that fine or still lean? when i add fuel through the tt chip it doesnt seem to make my a/f go richer im at 139 from 128 increase for WOT fuel and i cant get any changes or even increase in 02 mv. im not sure if im doing it wrong or whats going on?
  6. L

    please help ID this turbo

    so i needed a turbo as the last thing on my list for my build, i saw a te45a listed for sale, so i purchased it for 525 dollars, i used it to get the car running and i than purchased my other te-44 that i wanted. so i went by what the guy i purchased it from told me it was a te45a so i listed...
  7. L

    downshift clunk?

    seems like when i start slowing down to s stop sign when it downshifts into first it kind of clunks down into gear, the engine mounts and trans mounts are new, and the u joints arent bad, im thinking there is slop somewhere, the driveshaft has some play if its on the lift in nuetral if i try to...
  8. L

    My cars story, lots of pics!

    sooo ive always wanted one of these cars since i can remember, not your average dream car for a 14 year old which was only 10 years ago, i sold my 00 trans am after i was done with it including heads cam intake exhaust, it was my high school car, for my 1987 turbo t we4, is was rough needed...
  9. L

    how to read wide band readings and what to look for

    im picking up my wideband tonight from a friend its the aem uego with bosch 02 and gage, what a/f ratio should i be looking for? anything else i should keep in mind?
  10. L

    new displaement for a .30 3.8?

    does having my engine bored .30 change the actual displacement in liters? if so by how much? is it still a 3.8 or bigger?
  11. L

    sucking oil/pcv problem

    i have a breather on each valve cover and im using the stock pcv setup, when i changed the upper intake plenum gasket i noticed alot of oil was coated on the inside. so i capped the pcv temporarily and i guess the breathers were blowing the air out since it had no where else to go. at like half...
  12. L

    lc2 wideband

    before i buy it new, it shouldnt hurt to see if some one has one they want to sell already, powerlogger not neccessary, just wide band complete system and a a/f gage if you have it. pm me
  13. L

    tuning questions with adding fuel and boost

    so i have my new chip coming in and everything will match everything, TC, turbo injectors fuel pump hot wire manual boost controller, all the sensors are set and im ready to go, so first, start at low boost and continue to up it until i see some kr correct? 02 milivolts should be at 8-820 so...
  14. L

    anti-surge housing for te-44?

    i dont want to install a BOV, and i do alot of light to light or city driving and i get the surge, atleast a different housing would help with the surge, any one sell it?
  15. L

    Highly recomend lt1 starter!

    i put my new starter in and it weighed atleast like 8-10 lbs, and took forever to start, not a car issue but a slow turning engine from the original starter. just installed a 96 corvette starter, it cost 135 brand new, it was about half the weight, half the size and starts up in half the time...
  16. L

    question for fellow aligners

    i have the john bean visualiner, and aligned hundreds of cars, but when i finally aligned mine it gave me 2 options, 87 regal with PAS and without PAS, i called my snap on guy and he had no clue either. any ideas?
  17. L

    narrowing down false kr

    so ive been trying to hunt down this false kr problem and i dont know what else to check, ive checked archives and checked the things that are obvious. if i rev it in park or nuetral usually higher rpm i start getting readings from 1.5-6.0 most recently ive done -kenne bell 8mm wires -torque...
  18. L

    Wildwood NJ classic car show

    its been going on for a couple years, now and Ive seen the videos from last year of the burnout madness and a couple turbo buicks in there, im stayin for the weekend friday morning to sunday night. the whole boardwalk is miles long lined with classics its a really nice show. it says 2012 but...
  19. L

    parts for sale

    te45a .82 exh housing polished, no smoke or shaft play - 500 shipped stock downpipe and elbow= best offer stock intercooler and fan- best offer stock timing cover- best offer. 973-330-1874 call or text for pics
  20. L

    te45a for sale or trade

    i baught this from a member here, the last thing i needed for my car to run was a turbo, so i purchased this one just to start driving the car, its obviously way to o big for my setup but it does pull, i i will trade for a te44 no shaft play, or smoke, its in perfect working condition...
Top