Search results

  1. B

    Bunch of Buick Parts

    Mike, sent you payment. Thanks!
  2. B

    Bunch of Buick Parts

    I take number #14. shift linkage from 200r4. thanks.
  3. B

    200-4r no second gear

    I checked the plug in the valve body. It is good, tight ,and in the correct hole. I thinking maybe to swap the valve body's out and try. What do you think??
  4. B

    200-4r no second gear

    No transfer tube on this shift kit. CK Perf instructions were to the take tube off. Block one hole with round rivet in the kit and the other is a vent. Have the same shift kit in my original trans and shifts great. any other things I can check?
  5. B

    200-4r no second gear

    I have a little problem that I can't figure out. I just totally rebuilt a 200-4r ground up. All billet parts and shift kit from CK Performance. I checked the intermediate band(servo) and adjusted the TV cable properly. The car shifts perfect into second nice and hard at 25 mph when the shift is...
  6. B

    Xfi aux input settings no change with any values

    Well I figured it out. You were correct. In the main dashboard there is two different fuel psi and oil psi. The 2.05 updates changed it automatically to the others ones in the pull down. Thanks Cal!
  7. B

    Xfi aux input settings no change with any values

    Ok. I will check that and let you know. Thanks allot, Cal.
  8. B

    Xfi aux input settings no change with any values

    What else do you think I should check?
  9. B

    Xfi aux input settings no change with any values

    Key on, raw voltage on fuel is 2.55v and oil is .96v. running at 1,000 rpm is like 2.51v fuel and 3.65 oil. Is that good?
  10. B

    Xfi aux input settings no change with any values

    Thanks Cal for your response! I did put in 0 psi 1 volt + 100psi 5 volts. Got nothing. Do you think those are wrong for those transponders? From what I read the aux1 +aux2 under the analog sendor table will not change anything?
  11. B

    Xfi aux input settings no change with any values

    I upgraded to 2.05 and having a similar problem. I can get caspers fuel and oil to read anything. Can you or anyone tell me what parameters to put into the calibration. Worked fine with 2.01.
  12. B

    Spring cleaning bunch of stuff again!!

    I take bov valve, if it's still for sale.
  13. B

    Spring cleaning bunch of stuff again!!

    I take the pipe with the BOV valve!
  14. B

    Moving, misc parts for sale

    thanks for the pictures of the 8445 heads.
  15. B

    Moving, misc parts for sale

    Can you give all the details on the 8445 Heads?
  16. B

    ATR bypass-sneeze valve

    Anyone have an ATR Bypass-Sneeze Valve part # RP547A for sale? New would be great.
Top